Speco Technologies Security Camera CVC5100BPVF User Manual

INSTRUCTION  
MANUAL  
PIR Sensor Camera  
CVC5100BPVF / CVC5100BPVFW  
CVC5200BPVF / CVC5200BPVFW  
 
Only use the camera under conditions  
where temperatures are between  
-10°C and +50°C. Be especially careful to provide  
ventilation when operating under high  
temperatures.  
Severe lighting change or flicker can  
cause the camera to work improperly.  
This is one of the most important parts of the  
camera. Be careful not to leave  
fingerprints on the lens cover.  
It can cause malfunctions to occur.  
Severe lighting change or flicker can  
cause the camera to work improperly.  
If exposed to radioactivity the CCD  
will fail.  
NOTE  
* If the camera is exposed to spotlight or object reflecting strong light,  
smear or blooming may occur.  
* please check that the power satisfies the normal specification before  
connecting the camera.  
2
 
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK  
DO NOT REMOVE COVER(OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
ISO14001  
The lightning flash with an arrowhead symbol, within an equilateral  
triangle is intended to alert the user to the presence of uninsulated  
dangerous voltage within the product's enclosure that may be of  
sufficient magnitude to constitute a risk of electric shock to persons.  
The exclamation point within an equilateral triangle is intended to alert  
the user to the presence of important operating and maintenance  
(servicing) instructions in the literature accompanying the appliance.  
INFORMATION - This equipment has been tested and found to comply with  
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.  
These limits are designed to provide reasonable protection against harmful  
interference when the equipment is operated in a commercial environment.  
This equipment generates, uses, and can radiate radio frequency energy and, if  
not installed and used in accordance with the instruction manual, may cause  
harmful interference to radio communications.  
Operation of this equipment in a residential area is likely to cause harmful  
interference in which case the user will be required to correct the interference at  
their own expense.  
WARNING - Changes or modifications not expressly approved by the  
manufacturer could void the user’s authority to operate the equipment.  
CAUTION : To prevent electric shock and risk of fire hazards:  
Do NOT use power sources other than those specified.  
This installation should be made by a qualified service person and  
should conform to all local codes.  
3
 
ꢁꢂꢃꢄꢅꢆꢇꢈꢉꢊꢅꢋꢌꢍꢅꢎꢏꢉꢊ  
ꢐꢋꢄꢍꢂꢌꢅꢎꢏꢉꢊꢇꢃꢏꢋꢇꢌꢊꢄꢇꢇ  
There are no user serviceable parts inside  
Do not disassemble this camera other than to make initial adjustments  
Use a UL approved regulated 24 volt AC or 12 volt DC power supply  
rical shock  
Please insure that your installation area can support the weight of the camera  
ꢐꢑꢄꢂꢊꢄꢇꢒꢂꢉꢓꢑꢄꢇꢅꢒꢎꢊꢇꢍꢂꢔꢄꢋꢂꢇꢍꢂꢋꢄꢃꢌꢑꢑꢆꢇꢕ  
Do not use a strong or abrasive detergent when cleaning the camera  
Do not install near cooling or heating device  
 
Package Contents  
Please make sure that the following items are included in the Package:  
1) CVC5100BPVF, CVC5100BPVFW, CVC5200BPVF, CVC5200BPVFW  
• 1 Video Test Connector, Power Jack  
• 1 3Axis Bracket Round Base Adaptor  
• 2 Wrenches  
• Set Screw  
- 4 Tapping Screws 4x25  
- 4 Hexagon Socket Screws M5x10  
 
 
CAMERA INSTALLATION  
Compatibility  
1) CVC5100BPVF, CVC5100BPVFW, CVC5200BPVF, CVC5200BPVFW  
CVCJBB  
INTJBS  
INTCM  
 
CAMERA INSTALLATION  
1. CVC5100BPVF, CVC5100BPVFW, CVC5200BPVF, CVC5200BPVFW  
WALL  
CAMERA ASSEMBLY  
3AXIS BRACKET ROUND BASE ADAPTOR  
TAPPING SCREW 4X25, 4EA  
HEXAGON SOCKET SCREW M5X10, 4EA  
8
 
PIR Sensor Weatherproof Bullet Camera  
DC Auto Iris Varifocal Lens(2.8mm-12mm)  
CVC5100BPVF  
CVC5100BPVFW  
600TV Lines  
DC Auto Iris Varifocal  
Lens(2.8mm-12mm)  
True Day / Night Capability  
ICR-IR Cut Filter Removable  
White LEDs * 6pcs  
IR LEDs * 24pcs  
SPECIFICATIONS  
MODEL  
CVC5100BPVF / CVC5100BPVFW  
1/3” Sony Super HAD ll CCD  
NTSC, PAL  
NTSC=811(H) * 508(V) / PAL=795(H) * 596(V)  
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)  
NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V)  
2:1 Interlace  
Internal  
600TV Lines  
CDS OFF: 0.15 Lux, CDS ON: 0.00002 Lux  
More than 52dB  
CVBS: 1.0Vp-p / 75  
NTSC=(1/60sec~1/120,000sec) / PAL=(1/50sec~1/120,000sec)  
Available  
On / Off (Level adjustable)  
BLC / HLC / OFF  
Color / BW / AUTO  
Low / High / Off  
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)  
Auto / Off (Selectable x2 ~ x512)  
On / Off (8 Programmable Zones)  
On / Off (12 Programmable Zones)  
On / Off (Level adjustable)  
On / Off (x1 ~ x16)  
On / Off  
On / Off (Level adjustable)  
On / Off  
DC 12V / AC24V(Dual Voltage)  
DC 12V 250mA(CDS OFF,PIR OFF) / 600mA(CDS ON,PIR ON)  
Heater ON Adj:200~600mA  
AC 24V 100mA(CDS OFF,PIR OFF),250mA(CDSON,PIR ON)  
Heater ON Adj:120~250mA  
DC Auto Iris Varifocal Lens(2.8mm-12mm)  
65 ft  
-4˚F ~ +140˚F.RH 95% Max.  
-4˚F ~ +140˚F.RH 95% Max.  
3.70”(W) * 3.93”(H) * 11.22”(D)  
3.52 lbs  
Image Pick-Up Device  
TV System  
Total Pixels  
Effective Pixels  
Scanning Frequency  
Scanning System  
Synchronization  
Resolution  
Minimum Illumination  
S/N Ratio  
Video Output  
Electronic Shutter Speed  
OSD  
SSDR  
BLC  
Day & Night  
Gain Control  
White Balance  
SENS-UP  
Motion Detection  
Privacy Masking  
SSNR III (Digital Noise Reduction)  
Digital Zoom  
DIS (Digital Image Stabilizadion)  
Sharpness  
Filp / Mirror  
Power Supply  
Power Consumption  
Lens  
IR Distance  
Operational Temp.  
Storage Temp.  
Dimension  
Weight  
9
 
PIR Sensor Weatherproof Bullet Camera  
DC Auto Iris Varifocal Lens (5mm-50mm)  
CVC5200BPVF  
CVC5200BPVFW  
600TV Lines  
DC Auto Iris Varifocal  
Lens(5mm-50mm)  
True Day / Night Capability  
ICR-IR Cut Filter Removable  
White LEDs * 6pcs  
IR LEDs * 24pcs  
SPECIFICATIONS  
MODEL  
CVC5200BPVF / CVC5200BPVFW  
1/3” Sony Super HAD ll CCD  
NTSC, PAL  
NTSC=811(H) * 508(V) / PAL=795(H) * 596(V)  
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)  
NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V)  
2:1 Interlace  
Internal  
600TV Lines  
CDS OFF: 0.15 Lux, CDS ON: 0.00002 Lux  
More than 52dB  
CVBS: 1.0Vp-p / 75  
NTSC=(1/60sec~1/120,000sec) / PAL=(1/50sec~1/120,000sec)  
Available  
On / Off (Level adjustable)  
BLC / HLC / OFF  
Color / BW / AUTO  
Low / High / Off  
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)  
Auto / Off (Selectable x2 ~ x512)  
On / Off (8 Programmable Zones)  
On / Off (12 Programmable Zones)  
On / Off (Level adjustable)  
On / Off (x1 ~ x16)  
On / Off  
On / Off (Level adjustable)  
On / Off  
DC 12V / AC24V(Dual Voltage)  
DC 12V 250mA(CDS OFF,PIR OFF) / 600mA(CDS ON,PIR ON)  
Heater ON Adj:200~600mA  
AC 24V 100mA(CDS OFF,PIR OFF),250mA(CDSON,PIR ON)  
Heater ON Adj:120~250mA  
DC Auto Iris Varifocal Lens(5mm-50mm)  
65 ft  
-4˚F ~ +140˚F. RH 95% Max.  
-4˚F ~ +140˚F. RH 95% Max.  
3.70”(W) * 3.93”(H) * 11.22”(D)  
3.52 lbs  
Image Pick-Up Device  
TV System  
Total Pixels  
Effective Pixels  
Scanning Frequency  
Scanning System  
Synchronization  
Resolution  
Minimum Illumination  
S/N Ratio  
Video Output  
Electronic Shutter Speed  
OSD  
SSDR  
BLC  
Day & Night  
Gain Control  
White Balance  
SENS-UP  
Motion Detection  
Privacy Masking  
SSNR III (Digital Noise Reduction)  
Digital Zoom  
DIS (Digital Image Stabilizadion)  
Sharpness  
Filp / Mirror  
Power Supply  
Power Consumption  
Lens  
IR Distance  
Operational Temp.  
Storage Temp.  
Dimension  
Weight  
10  
 
CAMERA INSTALLATION  
1) CVC5100BPVF, CVC5100BPVFW, CVC5200BPVF, CVC5200BPVFW  
11.22”  
3.70”  
5.90”  
5.19”  
10.55”  
11  
 
- The built-in high sensitivity COLOR CCD produces a clear image even in 0Lux(B/W, IR-LED ON)or lower  
illumination.  
- By adopting a diagonal 6mm(1/3") 410,000 (NTSC) pixel, 470,000(PAL) pixel SONY CCD, the camera  
produces clear picture quality with a horizontal resolution of 600 TV lines for color and a horizontal  
resolution of 700TV lines for BW mode.  
- The high-performance W-V DSP chip effectively removes low-light gain noise and ghosting to provide  
clear images even in dark environments.  
- This camera has a function that automatically selects the mode that is appropriate for daytime or night-time  
conditions.  
The COLOR mode operates in daytime conditions to provide optimum colors, and BW mode operates in  
night-time conditions to enhance the definition of the image.  
- For images with high contrast between bright and dark Areas from difficult lighting conditions such as  
backlighting, this camera selectively illuminates darker Areas while retaining the same light level for  
brighter Areas to even out the overall brightness.  
- HLC(High Light Compensation), SENS-UP, FLIP(H/V-REV), D-ZOOM, SHARPNESS, MOTION DETECTION and PRIVACY  
functions are provided.  
- Up-most and advanced DNR technology camera picture quality has a disk saving effects due to Image sizes  
are smaller than standard CCTV camera image.  
- The camera can be controlled by selecting the menu text displayed on the monitor screen.  
- Built-In PIR sensor turns the white LED ON when the PIR is triggered by motion.  
12  
 
ꢂꢃꢄꢅꢆꢇꢈꢉꢊꢇꢋꢅꢌꢍꢉꢉꢇꢈ  
1. Type A, Type B, Type C of OSD button could be used when it needs to  
OSD control.  
2. Type D is extra Option (wired Remote controller)  
Up button: Moves the cursor upwards. Use this button to select an item  
or adjust the parameters.  
Down button: Moves the cursor downwards. Use this button to select an  
item or adjust the parameters.  
Left button: Moves the cursor to the left. Use this button to select or  
adjust the parameters of the selected item. The parameter changes  
each time this button is pressed.  
Right button: Moves the cursor to the right. Use this button to select or  
adjust the parameters of the selected item. The parameter changes each  
time this button is pressed.  
Set button: Executes selections and displays a submenu for an item with  
the  
mark.  
ꢀꢁ  
 
ꢃꢄꢅꢆꢂꢇꢄꢈꢆꢉ  
ꢀꢎꢂꢏꢐꢄꢋꢋꢂꢈꢑꢄꢂꢒꢆꢅꢓꢈꢌꢔꢅꢂꢇꢄꢈꢆꢉꢂꢋꢕꢌꢈꢓꢑꢎ  
ꢖꢂꢃꢗꢌꢅꢂꢋꢄꢈꢆꢉꢂꢘꢄꢅꢆꢂꢌꢋꢂꢙꢌꢋꢉꢚꢗꢛꢄꢙꢂꢔꢅꢂꢈꢑꢄꢂꢘꢔꢅꢌꢈꢔꢐꢂꢋꢓꢐꢄꢄꢅꢎ  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSNR  
5.BACKLIGHT  
6.DNR3  
ATW  
OFF  
OFF  
ON  
7.DAY/NIGHT  
8.SPECIAL  
9.EXIT  
AUTO  
SAVE  
ꢯꢎꢂꢇꢄꢚꢄꢓꢈꢂꢗꢂꢙꢄꢋꢌꢐꢄꢙꢂꢫꢆꢅꢓꢈꢌꢔꢅꢂꢆꢋꢌꢅꢍꢂꢈꢑꢄꢂꢒꢆꢅꢓꢈꢌꢔꢅꢂꢇꢄꢈꢆꢉꢂꢋꢕꢌꢈꢓꢑꢎ  
ꢖꢂꢏꢚꢗꢓꢄꢂꢈꢑꢄꢂꢓꢆꢐꢋꢔꢐꢂꢔꢩꢄꢐꢂꢗꢂꢙꢄꢋꢌꢐꢄꢙꢂꢌꢈꢄꢘꢎ  
ꢜꢎꢂꢇꢄꢈꢂꢆꢉꢂꢗꢂꢋꢄꢚꢄꢓꢈꢄꢙꢂꢌꢈꢄꢘꢂꢠꢛꢂꢆꢋꢌꢅꢍꢂꢈꢑꢄꢂꢒꢆꢅꢓꢈꢌꢔꢅꢂꢇꢄꢈꢆꢉꢂꢋꢕꢌꢈꢓꢑꢎ  
ꢁꢎꢂꢂꢫꢌꢅꢌꢋꢑꢂꢈꢑꢄꢂꢋꢄꢈꢈꢌꢅꢍꢬꢂꢋꢄꢚꢄꢓꢈꢂꢮꢟꢴꢣꢝꢮꢂꢗꢅꢙꢂꢉꢐꢄꢋꢋꢂꢈꢑꢄꢂꢒꢆꢅꢓꢈꢌꢔꢅꢂꢇꢄꢈꢆꢉꢂꢋꢕꢌꢈꢓꢑꢎ  
NOTE  
■ An item with the  
with the icon and press the Function Setup switch.  
icon also has sub menus. To select a sub menu, select an item  
◀ꢂ  
■ An item with the - - - icon is unavailable due to function settings.  
ꢊꢄꢅꢋꢂꢇꢄꢈꢈꢌꢅꢍ  
ꢪꢋꢌꢅꢍꢂꢈꢑꢌꢋꢂꢫꢆꢅꢓꢈꢌꢔꢅꢬꢂꢛꢔꢆꢂꢓꢗꢅꢂꢓꢔꢅꢈꢐꢔꢚꢂꢈꢑꢄꢂꢋꢓꢐꢄꢄꢅꢂꢠꢐꢌꢍꢑꢈꢅꢄꢋꢋꢎ  
ꢀꢎꢂꢭꢑꢄꢅꢂꢈꢑꢄꢂꢇꢟꢝꢪꢏꢂꢘꢄꢅꢆꢂꢋꢓꢐꢄꢄꢅꢂꢌꢋꢂꢙꢌꢋꢉꢚꢗꢛꢄꢙꢬꢂꢋꢄꢚꢄꢓꢈꢂꢮꢊꢟꢥꢇꢮꢂꢠꢛꢂꢆꢋꢌꢅꢍꢂꢂ  
ꢂꢂꢈꢑꢄꢂꢒꢆꢅꢓꢈꢌꢔꢅꢂꢇꢄꢈꢆꢉꢂꢋꢕꢌꢈꢓꢑꢂꢋꢔꢂꢈꢑꢗꢈꢂꢈꢑꢄꢂꢗꢐꢐꢔꢕꢂꢌꢅꢙꢌꢓꢗꢈꢄꢋꢂꢮꢊꢟꢥꢇꢮꢎ  
ꢯꢎꢂꢰꢱꢂꢦꢂꢆꢂꢓꢗꢅꢂꢗꢙꢨꢆꢋꢈꢂꢈꢑꢄꢂꢘꢌꢅꢌꢘꢆꢘꢂꢋꢑꢆꢈꢈꢄꢐꢂꢗꢅꢙꢂꢘꢗꢳꢌꢘꢆꢘꢂꢩꢗꢚꢆꢄꢂꢔꢫꢂꢟꢇꢱꢂ  
ꢂꢂꢋꢑꢆꢈꢈꢄꢐꢂꢘꢔꢙꢄꢎ  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
ATW  
ꢜꢎꢂꢝꢞꢟꢂꢊꢄꢅꢋꢂꢘꢔꢙꢄꢂꢑꢗꢋꢂꢋꢆꢠꢂꢘꢄꢅꢆꢂꢌꢈꢄꢘꢋꢂꢗꢋꢂꢚꢌꢋꢈꢄꢙꢂꢠꢄꢚꢔꢕꢎ  
ꢖꢂꢡꢢꢣꢤꢞꢝꢥꢟꢇꢇꢂꢦꢂꢧꢙꢨꢆꢋꢈꢋꢂꢈꢑꢄꢂꢩꢌꢙꢄꢔꢂꢠꢐꢌꢍꢑꢈꢅꢄꢋꢋꢎ  
ꢀꢁ  
 
ꢂꢃꢄꢅꢆꢇꢈꢃꢉꢊꢋꢃꢌꢃꢃꢏꢐꢑꢒꢓꢔꢃꢔꢕꢖꢃꢊꢆꢃꢗꢖꢘꢓꢃꢙꢎꢚꢒꢓꢃꢚꢎꢛꢛꢖꢚꢔꢗꢜꢝꢃꢜꢎꢒꢃꢞꢒꢓꢔꢃꢏꢚꢔꢟꢠꢏꢔꢖꢃꢔꢕꢖꢃ  
ꢄꢎꢚꢒꢓꢃꢈꢖꢔꢔꢟꢘꢡꢓꢃꢞꢎꢐꢖꢃꢒꢘꢐꢖꢛꢃꢖꢏꢚꢕꢃꢗꢖꢘꢓꢃꢞꢖꢘꢒꢢꢃꢉꢚꢔꢟꢠꢏꢔꢖꢃꢔꢕꢖꢃꢄꢎꢚꢒꢓꢃꢈꢖꢔꢔꢟꢘꢡꢓꢃ  
ꢞꢎꢐꢖꢝꢃꢏꢐꢑꢒꢓꢔꢃꢔꢕꢖꢃꢗꢖꢘꢓꢃꢙꢎꢚꢒꢓꢝꢃꢏꢘꢐꢃꢔꢕꢖꢘꢃꢐꢖꢏꢚꢔꢟꢠꢏꢔꢖꢃꢔꢕꢖꢃꢓꢖꢔꢔꢟꢘꢡꢓꢃꢞꢎꢐꢖꢢ  
NOTE  
■ If color rolling occurs when using a DC lens, set Shutter to Fixed (---).  
ꢣꢤꢥꢎꢓꢒꢛꢖꢃꢈꢖꢔꢔꢟꢘꢡ  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
ATW  
ꢀꢢꢃꢦꢕꢖꢘꢃꢔꢕꢖꢃꢈꢣꢍꢇꢧꢃꢞꢖꢘꢒꢃꢓꢚꢛꢖꢖꢘꢃꢟꢓꢃꢐꢟꢓꢥꢗꢏꢜꢖꢐꢝꢃꢓꢖꢗꢖꢚꢔꢃꢨꢣꢩꢧꢅꢈꢇꢪꢣꢨꢃꢫꢜꢃ  
ꢒꢓꢟꢘꢡꢃꢔꢕꢖꢃꢄꢒꢘꢚꢔꢟꢎꢘꢃꢈꢖꢔꢒꢥꢃꢈꢬꢟꢔꢚꢕꢢ  
ꢭꢢꢃꢈꢖꢗꢖꢚꢔꢃꢏꢃꢐꢖꢓꢟꢛꢖꢐꢃꢞꢎꢐꢖꢃꢒꢓꢟꢘꢡꢃꢔꢕꢖꢃꢄꢒꢘꢚꢔꢟꢎꢘꢃꢈꢖꢔꢒꢥꢃꢓꢬꢟꢔꢚꢕꢢ  
EXPOSURE SETUP  
1.BRIGHTNESS  
2.SHUTTER  
3.AGC  
4.SENS-UP  
5.RETURN  
25  
- - -  
HIGH  
OFF  
◆ꢃꢈꢮꢇꢍꢍꢣꢪꢃꢌꢃꢒꢃꢚꢏꢘꢃꢓꢖꢗꢖꢚꢔꢃꢖꢟꢔꢕꢖꢛꢃꢏꢒꢔꢎꢃꢎꢛꢃꢞꢏꢘꢒꢏꢗꢃꢓꢕꢒꢔꢔꢖꢛꢢ  
ꢰꢃꢂꢂꢂꢃꢌꢃꢈꢕꢒꢔꢔꢖꢛꢃꢓꢥꢖꢖꢐꢃꢟꢓꢃꢙꢟꢤꢖꢐꢃꢏꢔꢃꢀꢱꢲꢳꢓꢖꢚꢴꢀꢱꢁꢳꢓꢖꢚꢵ  
ꢰꢃꢣꢈꢆꢃꢌꢃꢈꢖꢗꢖꢚꢔꢃꢔꢕꢟꢓꢃꢔꢎꢃꢚꢎꢘꢔꢛꢎꢗꢃꢔꢕꢖꢃꢓꢕꢒꢔꢔꢖꢛꢃꢓꢥꢖꢖꢐꢃꢏꢒꢔꢎꢞꢏꢔꢟꢚꢏꢗꢗꢜꢢꢃꢶꢙꢃꢣꢈꢆꢃꢟꢓꢃꢃ  
ꢃꢃꢃꢃꢃꢃꢃꢃꢓꢖꢗꢖꢚꢔꢖꢐꢝꢃꢔꢕꢖꢃꢓꢕꢒꢔꢔꢖꢛꢃꢓꢥꢖꢖꢐꢃꢟꢓꢃꢏꢒꢔꢎꢞꢏꢔꢟꢚꢏꢗꢗꢜꢃꢚꢎꢘꢔꢛꢎꢗꢗꢖꢐꢃꢐꢖꢥꢖꢘꢐꢟꢘꢡꢃ  
ꢃꢃꢃꢃꢃꢃꢃꢃꢎꢘꢃꢔꢕꢖꢃꢏꢞꢫꢟꢖꢘꢔꢃꢟꢗꢗꢒꢞꢟꢘꢏꢔꢟꢎꢘꢃꢎꢙꢃꢔꢕꢖꢃꢓꢒꢫꢑꢖꢚꢔꢢ  
ꢰꢃꢷꢉꢸꢇꢉꢹꢃꢌꢃꢒꢃꢚꢏꢘꢃꢚꢎꢘꢔꢛꢎꢗꢃꢓꢕꢒꢔꢔꢖꢛꢃꢓꢥꢖꢖꢐꢃꢞꢏꢘꢒꢏꢗꢗꢜꢢ  
ꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢴꢸꢍꢈꢆꢃꢷꢅꢊꢣꢹꢃꢌꢃꢀꢱꢲꢳꢺꢀꢱꢀꢭꢳꢝꢳꢳꢳꢝꢃꢹꢃꢷꢅꢊꢣꢹꢃꢌꢃꢀꢱꢁꢳꢺꢀꢱꢀꢭꢳꢝꢳꢳꢳꢵ  
ꢰꢃꢉꢢꢄꢹꢻꢃꢌꢃꢈꢖꢗꢖꢚꢔꢃꢔꢕꢟꢓꢃꢬꢕꢖꢘꢃꢜꢎꢒꢃꢓꢖꢖꢃꢥꢟꢚꢔꢒꢛꢖꢃꢙꢗꢟꢚꢼꢖꢛꢝꢃꢔꢕꢟꢓꢃꢚꢏꢘꢃꢕꢏꢥꢥꢖꢘꢃꢬꢕꢖꢘꢃꢔꢕꢖꢃꢃ  
ꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢙꢛꢖꢽꢒꢖꢘꢚꢜꢃꢎꢙꢃꢔꢕꢖꢃꢗꢎꢚꢏꢗꢃꢗꢟꢡꢕꢔꢟꢘꢡꢃꢚꢗꢏꢓꢕꢖꢓꢃꢬꢟꢔꢕꢃꢔꢕꢖꢃꢚꢏꢞꢖꢛꢏꢢ  
NOTE  
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.  
ꢀꢁ  
 
◆ꢂꢃꢄꢅꢆꢃꢇꢈꢉꢂꢄꢃꢊꢋꢂꢅꢉꢋꢈꢌꢉꢍꢎꢂꢏꢂꢈꢐꢑꢂꢐꢒꢓꢐꢑꢔꢂꢕꢐꢑꢂꢓꢖꢒꢗꢂꢘꢑꢙꢑꢘꢚꢂꢕꢐꢑꢂꢛꢔꢒꢓꢐꢕꢑꢔꢂꢕꢐꢑꢂꢜꢝꢔꢑꢑꢗꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢞꢂꢛꢟꢕꢂꢕꢐꢑꢂꢐꢒꢓꢐꢑꢔꢂꢕꢐꢑꢂꢗꢠꢒꢜꢑꢡ  
ꢢꢂꢉꢣꢣꢂꢏꢂꢤꢑꢖꢝꢕꢒꢙꢖꢕꢑꢜꢂꢕꢐꢑꢂꢃꢄꢅꢂꢥꢟꢗꢝꢕꢒꢠꢗꢡ  
ꢢꢂꢍꢉꢦꢂꢏꢂꢃꢘꢘꢠꢧꢜꢂꢖꢟꢕꢠꢨꢖꢕꢒꢝꢂꢓꢖꢒꢗꢂꢝꢠꢗꢕꢔꢠꢘꢂꢥꢔꢠꢨꢂꢩꢡꢪꢫꢬꢂꢕꢠꢂꢪꢭꢫꢬꢡ  
ꢢꢂꢮꢊꢄꢮꢂꢏꢂꢃꢘꢘꢠꢧꢜꢂꢖꢟꢕꢠꢨꢖꢕꢒꢝꢂꢓꢖꢒꢗꢂꢝꢠꢗꢕꢔꢠꢘꢂꢥꢔꢠꢨꢂꢩꢡꢪꢫꢬꢂꢕꢠꢂꢪꢯꢫꢬꢡ  
◆ꢂꢳꢴꢋꢳꢞꢇꢲꢂꢏꢂꢦꢐꢑꢗꢂꢒꢕꢂꢒꢜꢂꢗꢒꢓꢐꢕꢂꢠꢔꢂꢫꢖꢔꢱꢚꢂꢕꢐꢑꢂꢝꢖꢨꢑꢔꢖꢂꢖꢟꢕꢠꢨꢖꢕꢒꢝꢖꢘꢘꢰꢂꢫꢑꢕꢑꢝꢕꢜꢂꢕꢐꢑꢂꢘꢒꢓꢐꢕꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢘꢑꢙꢑꢘꢂꢖꢗꢫꢂꢨꢖꢒꢗꢕꢖꢒꢗꢜꢂꢖꢂꢝꢘꢑꢖꢔꢂꢵꢒꢝꢕꢟꢔꢑꢂꢒꢥꢂꢕꢐꢒꢜꢂꢨꢠꢫꢑꢂꢒꢜꢂꢖꢝꢕꢒꢙꢖꢕꢑꢫꢡ  
ꢢꢂꢉꢣꢣꢂꢏꢂꢤꢑꢖꢝꢕꢒꢙꢖꢕꢑꢜꢂꢕꢐꢑꢂꢳꢴꢋꢳꢞꢇꢲꢂꢥꢟꢗꢝꢕꢒꢠꢗꢡ  
ꢢꢂꢃꢇꢈꢉꢂꢏꢂꢃꢝꢕꢒꢙꢖꢕꢑꢜꢂꢕꢐꢑꢂꢳꢴꢋꢳꢞꢇꢲꢂꢥꢟꢗꢝꢕꢒꢠꢗꢡ  
◆ꢂꢌꢴꢈꢇꢌꢋꢂꢏꢂꢳꢑꢘꢑꢝꢕꢂꢕꢐꢒꢜꢂꢕꢠꢂꢜꢖꢙꢑꢂꢕꢐꢑꢂꢝꢐꢖꢗꢓꢑꢜꢂꢒꢗꢂꢕꢐꢑꢂꢴꢶꢲꢉꢳꢇꢌꢴꢂꢨꢑꢗꢟꢂꢖꢗꢫꢂꢔꢑꢕꢟꢔꢗꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢕꢠꢂꢕꢐꢑꢂꢳꢴꢈꢇꢲꢂꢨꢑꢗꢟꢡ  
NOTE  
■ If you press the Function Setup switch to ‘AUTO’ mode, you can adjust brightness by  
increasing or decreasing the shutter speed. (x2 ~ x512)  
■ Note that the higher the zoom level, the brighter the screen, but the more likely there  
will be a ghosting effect.  
■ It is normal for Noise, Spots and Whitish symptoms to appear in SENS-UP mode when  
the D-ZOOM level is increased.  
ꢦꢐꢒꢕꢑꢂꢬꢖꢘꢖꢗꢝꢑꢂꢆꢦꢐꢒꢕꢑꢂꢬꢖꢘꢎꢂꢳꢑꢕꢕꢒꢗꢓ  
ꢇꢜꢑꢂꢕꢐꢑꢂꢦꢐꢒꢕꢑꢂꢬꢖꢘꢖꢗꢝꢑꢂꢥꢟꢗꢝꢕꢒꢠꢗꢂꢕꢠꢂꢖꢫꢷꢟꢜꢕꢂꢕꢐꢑꢂꢜꢝꢔꢑꢑꢗꢂꢝꢠꢘꢠꢔꢡ  
ꢀꢡꢂꢦꢐꢑꢗꢂꢕꢐꢑꢂꢳꢴꢈꢇꢲꢂꢨꢑꢗꢟꢂꢜꢝꢔꢑꢑꢗꢂꢒꢜꢂꢫꢒꢜꢵꢘꢖꢰꢑꢫꢚꢂꢜꢑꢘꢑꢝꢕꢂꢸꢦꢐꢒꢕꢑꢂꢬꢖꢘꢸꢂꢛꢰꢂꢟꢜꢒꢗꢓꢂꢕꢐꢑꢂ  
ꢣꢟꢗꢝꢕꢒꢠꢗꢂꢳꢑꢕꢟꢵꢂꢜꢧꢒꢕꢝꢐꢂꢜꢠꢂꢕꢐꢖꢕꢂꢕꢐꢑꢂꢖꢔꢔꢠꢧꢂꢒꢗꢫꢒꢝꢖꢕꢑꢜꢂꢸꢦꢐꢒꢕꢑꢂꢬꢖꢘꢸꢡ  
ꢭꢡꢂꢳꢑꢘꢑꢝꢕꢂꢖꢂꢫꢑꢜꢒꢔꢑꢫꢂꢨꢠꢫꢑꢂꢟꢜꢒꢗꢓꢂꢕꢐꢑꢂꢣꢟꢗꢝꢕꢒꢠꢗꢂꢳꢑꢕꢟꢵꢂꢜꢧꢒꢕꢝꢐꢡ  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
ATW  
ꢀꢁ  
 
※ꢂꢃꢄꢅꢄꢆꢇꢂꢈꢉꢄꢂꢈꢊꢂꢇꢋꢄꢂꢊꢈꢅꢅꢈꢌꢍꢉꢎꢂꢏꢂꢐꢈꢑꢄꢒꢓꢂꢔꢒꢂꢔꢕꢕꢖꢈꢕꢖꢍꢔꢇꢄꢂꢊꢈꢖꢂꢗꢈꢘꢖꢂꢕꢘꢖꢕꢈꢒꢄꢙ  
◆ꢂꢜꢂꢝꢂꢃꢄꢅꢄꢆꢇꢂꢇꢋꢍꢒꢂꢌꢋꢄꢉꢂꢇꢋꢄꢂꢆꢈꢅꢈꢖꢂꢇꢄꢐꢕꢄꢖꢔꢇꢘꢖꢄꢂꢍꢒꢂꢞꢄꢇꢌꢄꢄꢉꢂꢀꢓꢁꢟꢟ˚ꢠꢂꢔꢉꢑꢂꢀꢀꢓꢟꢟꢟ˚ꢠꢙ  
◆ꢂꢡꢢꢛꢣꢡꢡꢤꢂꢝꢂꢃꢄꢅꢄꢆꢇꢂꢇꢋꢍꢒꢂꢌꢋꢄꢉꢂꢇꢋꢄꢂꢆꢈꢅꢈꢖꢂꢇꢄꢐꢕꢄꢖꢔꢇꢘꢖꢄꢂꢍꢒꢂꢞꢄꢇꢌꢄꢄꢉꢂꢀꢓꢁꢟꢟ˚ꢠꢂꢔꢉꢑꢂꢀꢀꢓꢟꢟꢟ˚ꢠꢙ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢥꢒꢈꢑꢍꢘꢐꢂꢅꢍꢎꢋꢇꢂꢍꢉꢆꢅꢘꢒꢍꢈꢉꢦ  
◆ꢂꢧꢨꢣꢡꢡꢤꢂꢝꢂꢃꢄꢅꢄꢆꢇꢂꢇꢋꢍꢒꢂꢌꢋꢄꢉꢂꢇꢋꢄꢂꢆꢈꢅꢈꢖꢂꢇꢄꢐꢕꢄꢖꢔꢇꢘꢖꢄꢂꢍꢒꢂꢞꢄꢇꢌꢄꢄꢉꢂꢩꢓꢏꢟꢟ˚ꢠꢂꢔꢉꢑꢂꢪꢓꢏꢟꢟ˚ꢠꢙ  
◆ꢂꢫꢚꢨꢢꢚꢬꢂꢝꢂꢃꢄꢅꢄꢆꢇꢂꢇꢋꢍꢒꢂꢇꢈꢂꢊꢍꢉꢄꢭꢇꢘꢉꢄꢂꢜꢋꢍꢇꢄꢂꢮꢔꢅꢔꢉꢆꢄꢂꢐꢔꢉꢘꢔꢅꢅꢗꢙꢂꢃꢄꢇꢂꢜꢋꢍꢇꢄꢂꢮꢔꢅꢔꢉꢆꢄꢂꢊꢍꢖꢒꢇꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢞꢗꢂꢘꢒꢍꢉꢎꢂꢇꢋꢄꢂꢜꢂꢈꢖꢂꢚꢜꢯꢂꢐꢈꢑꢄꢙꢂꢚꢊꢇꢄꢖꢂꢇꢋꢔꢇꢂꢒꢌꢍꢇꢆꢋꢂꢇꢈꢂꢫꢚꢨꢢꢚꢬꢂꢐꢈꢑꢄꢓꢂꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢊꢍꢉꢄꢭꢇꢘꢉꢄꢂꢇꢋꢄꢂꢜꢋꢍꢇꢄꢂꢮꢔꢅꢔꢉꢆꢄꢂꢔꢉꢑꢂꢇꢋꢄꢉꢂꢕꢖꢄꢒꢒꢂꢇꢋꢄꢂꢰꢘꢉꢆꢇꢍꢈꢉꢂꢃꢄꢇꢘꢕꢂꢒꢌꢍꢇꢆꢋꢙ  
◆ꢂꢚꢜꢯ→ꢃꢱꢛꢂꢝꢂꢂꢊꢍꢉꢑꢂꢇꢋꢄꢂꢈꢕꢇꢍꢐꢔꢅꢂꢅꢘꢐꢍꢉꢔꢉꢆꢄꢂꢅꢄꢲꢄꢅꢂꢊꢈꢖꢂꢇꢋꢄꢂꢆꢘꢖꢖꢄꢉꢇꢂꢄꢉꢲꢍꢖꢈꢉꢐꢄꢉꢇꢓꢂꢕꢈꢍꢉꢇꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢇꢋꢄꢂꢆꢔꢐꢄꢖꢔꢂꢇꢈꢌꢔꢖꢑꢒꢂꢔꢂꢒꢋꢄꢄꢇꢂꢈꢊꢂꢌꢋꢍꢇꢄꢂꢕꢔꢕꢄꢖꢂꢔꢉꢑꢂꢕꢖꢄꢒꢒꢂꢇꢋꢄꢂꢰꢘꢉꢆꢇꢍꢈꢉꢂꢂꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢃꢄꢇꢘꢕꢂꢒꢌꢍꢇꢆꢋꢙꢂꢧꢊꢂꢇꢋꢄꢂꢄꢉꢲꢍꢖꢈꢉꢐꢄꢉꢇꢂꢆꢋꢔꢉꢎꢄꢒꢓꢂꢖꢄꢔꢑꢳꢘꢒꢇꢂꢍꢇꢙ  
NOTE  
White Balance may not work properly under the following conditions. In this case  
select the AWC mode.  
When the color temperature of the environment surrounding the subject is out of the  
control range (e.g. clear sky or sunset).  
When the ambient illumination of the subject is dim.  
illumination changes dramatically, the White Balance operation may become unstable.  
ꢃꢃꢨꢤꢂꢃꢄꢇꢇꢍꢉꢎ  
ꢃꢃꢨꢤꢂꢍꢅꢅꢘꢐꢍꢉꢔꢇꢄꢒꢂꢑꢔꢖꢴꢄꢖꢂꢒꢕꢈꢇꢒꢂꢈꢊꢂꢔꢉꢂꢍꢐꢔꢎꢄꢂꢌꢋꢍꢅꢄꢂꢖꢄꢇꢔꢍꢉꢍꢉꢎꢂꢇꢋꢄꢂꢒꢔꢐꢄꢂꢅꢍꢎꢋꢇꢂ  
ꢅꢄꢲꢄꢅꢂꢊꢈꢖꢂꢞꢖꢍꢎꢋꢇꢄꢖꢂꢒꢕꢈꢇꢒꢂꢇꢈꢂꢄꢲꢄꢉꢂꢈꢘꢇꢂꢇꢋꢄꢂꢈꢲꢄꢖꢔꢅꢅꢂꢞꢖꢍꢎꢋꢇꢉꢄꢒꢒꢂꢈꢊꢂꢍꢐꢔꢎꢄꢒꢂꢌꢍꢇꢋꢂ  
ꢋꢍꢎꢋꢂꢆꢈꢉꢇꢖꢔꢒꢇꢂꢞꢄꢇꢌꢄꢄꢉꢂꢞꢖꢍꢎꢋꢇꢂꢔꢉꢑꢂꢑꢔꢖꢴꢂꢒꢕꢈꢇꢒꢙ  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSNR  
ATW  
OFF  
ꢀꢙꢂꢜꢋꢄꢉꢂꢇꢋꢄꢂꢃꢱꢛꢢꢵꢂꢐꢄꢉꢘꢂꢒꢆꢖꢄꢄꢉꢂꢍꢒꢂꢑꢍꢒꢕꢅꢔꢗꢄꢑꢓꢂꢒꢄꢅꢄꢆꢇꢂꢶꢃꢃꢨꢤꢶꢂꢞꢗꢂꢘꢒꢍꢉꢎꢂ  
ꢇꢋꢄꢂꢒꢌꢍꢇꢆꢋꢂꢒꢈꢂꢇꢋꢔꢇꢂꢇꢋꢄꢂꢔꢖꢖꢈꢌꢂꢍꢉꢑꢍꢆꢔꢇꢄꢒꢂꢶꢃꢃꢨꢤꢶꢙ  
ꢷꢙꢂꢢꢒꢄꢂꢇꢋꢄꢂꢒꢌꢍꢇꢆꢋꢂꢇꢈꢂꢆꢋꢔꢉꢎꢄꢂꢇꢋꢄꢂꢃꢃꢨꢤꢂꢅꢄꢲꢄꢅꢂꢔꢆꢆꢈꢖꢑꢍꢉꢎꢂꢇꢈꢂꢇꢋꢄꢂꢆꢈꢉꢇꢖꢔꢒꢇꢂ  
ꢞꢄꢇꢌꢄꢄꢉꢂꢞꢖꢍꢎꢋꢇꢂꢔꢉꢑꢂꢑꢔꢖꢴꢂꢔꢖꢄꢔꢒꢙ  
ꢀꢁ  
 
ꢃꢄꢅꢆꢇꢈꢉꢊꢋꢂꢌꢍꢋꢋꢈꢎꢉ  
ꢏꢎꢇꢈꢆꢍꢂꢅꢐꢎꢑꢍꢎꢋꢈꢐꢎꢄꢇꢂꢅꢄꢒꢍꢓꢄꢔꢕꢂꢋꢊꢍꢂꢖꢗꢖꢘꢀꢙꢙꢃꢚꢗꢛꢂꢄꢎꢜꢂꢖꢗꢖꢘꢝꢙꢙꢃꢚꢗꢛꢂꢄꢓꢍꢂꢜꢍꢔꢈꢉꢎꢍꢜꢂ  
ꢋꢐꢂꢜꢍꢇꢈꢑꢍꢓꢂꢄꢂꢜꢈꢔꢋꢈꢎꢅꢋꢈꢑꢍꢂꢔꢞꢟꢠꢍꢅꢋꢂꢄꢎꢜꢂꢟꢄꢅꢆꢉꢓꢐꢞꢎꢜꢂꢄꢋꢂꢋꢊꢍꢂꢔꢄꢒꢍꢂꢋꢈꢒꢍꢕꢂꢍꢑꢍꢎꢂꢡꢊꢍꢎꢂꢋꢊꢍꢂ  
ꢔꢞꢟꢠꢍꢅꢋꢂꢈꢔꢂꢟꢄꢅꢆꢇꢈꢉꢊꢋꢕꢂꢟꢢꢂꢞꢔꢈꢎꢉꢂꢋꢊꢍꢂꢣꢍꢄꢋꢞꢓꢍꢔꢂꢐꢣꢂꢋꢊꢍꢂꢤꢓꢐꢤꢓꢈꢍꢋꢄꢓꢢꢂꢥꢦꢗꢂꢧꢌꢚꢂꢅꢊꢈꢤꢨ  
ꢀꢨꢂꢥꢊꢍꢎꢂꢋꢊꢍꢂꢌꢩꢪꢏꢚꢂꢒꢍꢎꢞꢂꢔꢅꢓꢍꢍꢎꢂꢈꢔꢂꢜꢈꢔꢤꢇꢄꢢꢍꢜꢕꢂꢔꢍꢇꢍꢅꢋꢂꢫꢃꢬꢖꢭꢮꢯꢰꢱꢪꢫꢂꢟꢢꢂꢞꢔꢈꢎꢉꢂ  
ꢋꢊꢍꢂꢛꢞꢎꢅꢋꢈꢐꢎꢂꢌꢍꢋꢞꢤꢂꢔꢡꢈꢋꢅꢊꢂꢔꢐꢂꢋꢊꢄꢋꢂꢋꢊꢍꢂꢄꢓꢓꢐꢡꢂꢈꢎꢜꢈꢅꢄꢋꢍꢔꢂꢫꢃꢬꢖꢭꢮꢯꢰꢱꢪꢫꢨ  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSNR  
5.BACKLIGHT  
6.DNR3  
ATW  
OFF  
OFF  
ON  
7.DAY/NIGHT  
8.SPECIAL  
9.EXIT  
AUTO  
SAVE  
ꢝꢨꢂꢌꢍꢇꢍꢅꢋꢂꢄꢂꢜꢍꢔꢈꢓꢍꢜꢂꢒꢐꢜꢍꢂꢞꢔꢈꢎꢉꢂꢋꢊꢍꢂꢛꢞꢎꢅꢋꢈꢐꢎꢂꢌꢍꢋꢞꢤꢂꢔꢡꢈꢋꢅꢊꢨ  
◆ꢂꢃꢮꢖꢂꢲꢂꢩꢎꢄꢟꢇꢍꢔꢂꢄꢂꢞꢔꢍꢓꢂꢋꢐꢂꢜꢈꢓꢍꢅꢋꢇꢢꢂꢔꢍꢇꢍꢅꢋꢂꢄꢂꢜꢍꢔꢈꢓꢍꢜꢂꢄꢓꢍꢄꢂꢣꢓꢐꢒꢂꢄꢂꢤꢈꢅꢋꢞꢓꢍꢕꢂꢄꢎꢜꢂꢋꢐꢂꢑꢈꢍꢡꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢋꢊꢍꢂꢄꢓꢍꢄꢂꢒꢐꢓꢍꢂꢅꢇꢍꢄꢓꢇꢢꢨ  
◆ꢂꢱꢮꢖꢂꢳꢱꢈꢉꢊꢂꢮꢈꢉꢊꢋꢂꢖꢐꢒꢤꢍꢎꢔꢄꢋꢈꢐꢎꢴꢂꢲꢂꢯꢣꢂꢋꢊꢍꢂꢔꢅꢍꢎꢍꢂꢅꢐꢎꢋꢄꢈꢎꢔꢂꢍꢵꢋꢓꢍꢒꢍꢇꢢꢂꢟꢓꢈꢉꢊꢋꢂꢇꢈꢉꢊꢋꢂꢄꢓꢍꢄꢔꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢔꢞꢅꢊꢂꢄꢔꢶꢂꢣꢓꢐꢒꢂꢅꢄꢓꢂꢊꢍꢄꢜꢇꢈꢉꢊꢋꢔꢕꢂꢋꢊꢍꢂꢇꢈꢉꢊꢋꢂꢅꢄꢎꢂꢒꢄꢔꢆꢂꢐꢞꢋꢂꢒꢞꢅꢊꢂꢐꢣꢂꢋꢊꢍꢂꢐꢎꢦꢔꢅꢓꢍꢍꢎꢂꢜꢍꢋꢄꢈꢇ  
ꢦꢂꢮꢩꢗꢩꢮꢂꢲꢂꢬꢜꢠꢞꢔꢋꢂꢇꢍꢑꢍꢇꢂꢐꢣꢂꢋꢊꢍꢂꢱꢮꢖꢂꢣꢞꢎꢅꢋꢈꢐꢎꢨ  
ꢦꢂꢮꢯꢷꢯꢪꢂꢲꢂꢩꢎꢄꢟꢇꢍꢂꢋꢐꢂꢅꢊꢄꢎꢉꢍꢂꢋꢊꢍꢂꢐꢤꢍꢓꢄꢋꢈꢎꢉꢂꢅꢐꢎꢜꢈꢋꢈꢐꢎꢨ  
ꢦꢂꢷꢬꢌꢭꢂꢖꢸꢮꢸꢹꢺꢪꢸꢻꢩꢂꢲꢂꢖꢊꢄꢎꢉꢍꢂꢋꢊꢍꢂꢅꢐꢇꢐꢓꢂꢺꢂꢋꢓꢄꢎꢔꢤꢄꢓꢍꢎꢅꢢꢂꢐꢣꢂꢋꢊꢍꢂꢒꢄꢔꢆꢈꢎꢉꢂꢄꢓꢍꢄꢨ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢳꢃꢇꢄꢅꢆꢕꢂꢹꢍꢜꢕꢂꢃꢇꢞꢍꢕꢂꢖꢢꢄꢎꢕꢂꢷꢄꢉꢍꢎꢋꢄꢴ  
ꢦꢂꢪꢸꢚꢺꢃꢸꢪꢪꢸꢷꢺꢮꢩꢛꢪꢺꢹꢯꢰꢱꢪꢂꢲꢂꢬꢜꢠꢞꢔꢋꢂꢋꢊꢍꢂꢄꢓꢍꢄꢂꢋꢐꢂꢟꢍꢂꢍꢎꢊꢄꢎꢅꢍꢜ  
◆ꢂꢸꢛꢛꢂꢲꢂꢻꢐꢋꢂꢟꢍꢈꢎꢉꢂꢞꢔꢍꢜ  
ꢝꢨꢂꢌꢍꢇꢍꢅꢋꢂꢄꢂꢜꢍꢔꢈꢓꢍꢜꢂꢒꢐꢜꢍꢂꢞꢔꢈꢎꢉꢂꢋꢊꢍꢂꢛꢞꢎꢅꢋꢈꢐꢎꢂꢌꢍꢋꢞꢤꢂꢔꢡꢈꢋꢅꢊꢂꢄꢎꢜꢂꢤꢓꢍꢔꢔꢂꢋꢊꢍꢂꢛꢞꢎꢅꢋꢈꢐꢎꢂꢌꢍꢋꢞꢤꢂꢔꢡꢈꢋꢅꢊꢨ  
◆ꢂꢌꢍꢇꢍꢅꢋꢂꢫꢃꢮꢖꢫꢂꢋꢐꢂꢄꢜꢠꢞꢔꢋꢂꢋꢊꢍꢂꢄꢓꢍꢄꢂꢋꢐꢂ  
ꢟꢍꢂꢍꢎꢊꢄꢎꢅꢍꢜꢂꢋꢊꢍꢎꢂꢄꢜꢠꢞꢔꢋꢂꢋꢊꢍꢂꢇꢍꢑꢍꢇꢨ  
◆ꢂꢌꢍꢇꢍꢅꢋꢂꢫꢃꢮꢖꢫꢂꢋꢐꢂꢄꢜꢠꢞꢔꢋꢂꢋꢊꢍꢂꢄꢓꢍꢄꢂꢋꢐꢂ  
ꢟꢍꢂꢍꢎꢊꢄꢎꢅꢍꢜꢂꢋꢊꢍꢎꢂꢄꢜꢠꢞꢔꢋꢂꢋꢊꢍꢂꢇꢍꢑꢍꢇꢨ  
ꢀꢁ  
 
BLC SETUP  
HLC SETUP  
LEVEL  
TOP  
BOTTOM  
LEFT  
LOW  
38  
109  
54  
LEVEL  
LIMITS  
MIDDLE  
NIGHT ONLY  
BLACK  
MASK COLOR  
MASK TONE  
TOP  
BOTTOM  
LEFT  
1
RIGHT  
121  
5
120  
5
Press Set to Return  
RIGHT  
172  
Press Set to Return  
NOTE  
Because there can be a difference in the effectiveness of HLC according to the amount  
of light area in the screen, optimize the installation angle for the best HLC performance.  
NIGHT ONLY mode.  
The HLC is not activated in day light or when bright light is not present at night in NIGHT  
ONLY mode.  
BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.  
ꢃꢄꢅꢆꢂꢇꢈꢉꢉꢊꢋꢌ  
ꢍꢎꢊꢏꢂꢐꢑꢋꢒꢉꢊꢓꢋꢂꢔꢈꢕꢑꢒꢈꢏꢂꢉꢎꢈꢂꢖꢗꢒꢘꢌꢔꢓꢑꢋꢕꢂꢋꢓꢊꢏꢈꢂꢊꢋꢂꢗꢂꢙꢓꢚꢂꢙꢑꢛꢊꢋꢗꢋꢒꢈꢂꢈꢋꢜꢊꢔꢓꢋꢛꢈꢋꢉꢝ  
ꢀꢝꢂꢞꢎꢈꢋꢂꢉꢎꢈꢂꢇꢟꢍꢠꢡꢂꢛꢈꢋꢑꢂꢏꢒꢔꢈꢈꢋꢂꢊꢏꢂꢕꢊꢏꢢꢙꢗꢣꢈꢕꢤꢂꢏꢈꢙꢈꢒꢉꢂꢥꢃꢄꢅꢆꢥꢂꢖꢣꢂꢑꢏꢊꢋꢌꢂꢉꢎꢈꢂ  
ꢦꢑꢋꢒꢉꢊꢓꢋꢂꢇꢈꢉꢑꢢꢂꢏꢚꢊꢉꢒꢎꢂꢏꢓꢂꢉꢎꢗꢉꢂꢉꢎꢈꢂꢗꢔꢔꢓꢚꢂꢊꢋꢕꢊꢒꢗꢉꢈꢏꢂꢥꢃꢄꢅꢆꢥꢝ  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSNR  
5.BACKLIGHT  
6.DNR3  
ATW  
OFF  
OFF  
ON  
7.DAY/NIGHT  
8.SPECIAL  
9.EXIT  
AUTO  
SAVE  
ꢧꢝꢂꢇꢈꢙꢈꢒꢉꢂꢗꢂꢕꢈꢏꢊꢔꢈꢕꢂꢛꢓꢕꢈꢂꢑꢏꢊꢋꢌꢂꢉꢎꢈꢂꢦꢑꢋꢒꢉꢊꢓꢋꢂꢇꢈꢉꢑꢢꢂꢏꢚꢊꢉꢒꢎꢝ  
◆ꢂꢨꢦꢦꢂꢩꢂꢃꢈꢗꢒꢉꢊꢜꢗꢉꢈꢏꢂꢃꢄꢅꢆꢝꢂꢄꢓꢊꢏꢈꢂꢊꢏꢂꢋꢓꢉꢂꢔꢈꢕꢑꢒꢈꢕꢝ  
◆ꢂꢨꢄꢂꢩꢂꢪꢒꢉꢊꢜꢗꢉꢈꢏꢂꢃꢄꢅꢆꢂꢏꢓꢂꢉꢎꢗꢉꢂꢋꢓꢊꢏꢈꢂꢊꢏꢂꢔꢈꢕꢑꢒꢈꢕꢝ  
ꢀꢁ  
 
ꢂꢃꢄꢅꢆꢇꢄꢇꢈꢆꢄꢉꢊꢋꢂꢄꢌꢍꢎꢆꢄꢇꢍꢄꢏꢐꢊꢏꢄꢑꢒꢎꢄꢓꢔꢆꢕꢕꢄꢇꢈꢆꢄꢖꢗꢒꢘꢇꢙꢍꢒꢄꢅꢆꢇꢗꢓꢄꢕꢚꢙꢇꢘꢈꢃꢄꢛꢈꢆꢒꢄꢜꢍꢗꢄ  
ꢘꢑꢒꢄꢑꢎꢝꢗꢕꢇꢄꢇꢈꢆꢄꢒꢍꢙꢕꢆꢄꢔꢆꢎꢗꢘꢇꢙꢍꢒꢄꢞꢆꢟꢆꢞꢃ  
NOTE  
You cannot set the DNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’.  
When adjusting the noise reduction level in the DNR3 mode, remember that the higher the  
level set, the more the noise level will be reduced, as will the brightness of the image.  
ꢉꢑꢜꢠꢊꢙꢡꢈꢇꢄꢅꢆꢇꢇꢙꢒꢡ  
ꢗꢄꢘꢑꢒꢄꢎꢙꢕꢓꢞꢑꢜꢄꢓꢙꢘꢇꢗꢔꢆꢕꢄꢙꢒꢄꢘꢍꢞꢍꢔꢄꢍꢔꢄꢣꢞꢑꢘꢤꢄꢑꢒꢎꢄꢚꢈꢙꢇꢆꢃ  
ꢥꢃꢄꢦꢈꢆꢒꢄꢇꢈꢆꢄꢅꢧꢛꢨꢩꢄꢌꢆꢒꢗꢄꢕꢘꢔꢆꢆꢒꢄꢙꢕꢄꢎꢙꢕꢓꢞꢑꢜꢆꢎꢪꢄꢕꢆꢞꢆꢘꢇꢄꢏꢉꢠꢊꢬꢭꢮꢛꢏꢣꢜꢄꢗꢕꢙꢒꢡꢄꢇꢈꢆꢄ  
ꢖꢗꢒꢘꢇꢙꢍꢒꢄꢅꢆꢇꢗꢓꢄꢕꢚꢙꢇꢘꢈꢄꢕꢍꢄꢇꢈꢑꢇꢄꢇꢈꢆꢄꢑꢔꢔꢍꢚꢄꢙꢒꢎꢙꢘꢑꢇꢆꢕꢄꢏꢉꢠꢊꢬꢭꢮꢛꢏꢃ  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSNR  
5.BACKLIGHT  
6.DNR3  
ATW  
OFF  
OFF  
ON  
7.DAY/NIGHT  
8.SPECIAL  
9.EXIT  
AUTO  
SAVE  
ꢀꢃꢄꢅꢆꢞꢆꢘꢇꢄꢑꢄꢎꢆꢕꢙꢔꢆꢎꢄꢌꢍꢎꢆꢄꢗꢕꢙꢒꢡꢄꢇꢈꢆꢄꢖꢗꢒꢘꢇꢙꢍꢒꢄꢅꢆꢇꢗꢓꢄꢅꢚꢙꢇꢘꢈꢄꢑꢘꢘꢍꢔꢎꢙꢒꢡꢄꢇꢍꢄꢇꢈꢆꢄ  
ꢓꢙꢘꢇꢗꢔꢆꢄꢎꢙꢕꢓꢞꢑꢜꢄꢜꢍꢗꢄꢚꢑꢒꢇꢃ  
◆ꢄꢯꢐꢰꢐꢋꢄꢱꢄꢛꢈꢆꢄꢓꢙꢘꢇꢗꢔꢆꢄꢙꢕꢄꢑꢞꢚꢑꢜꢕꢄꢎꢙꢕꢓꢞꢑꢜꢆꢎꢄꢙꢒꢄꢘꢍꢞꢍꢔꢃ  
◆ꢄꢲꢠꢦꢄꢱꢄꢛꢈꢆꢄꢓꢙꢘꢇꢗꢔꢆꢄꢙꢕꢄꢑꢞꢚꢑꢜꢕꢄꢎꢙꢕꢓꢞꢑꢜꢆꢎꢄꢙꢒꢄꢣꢞꢑꢘꢤꢄꢑꢒꢎꢄꢚꢈꢙꢇꢆꢃ  
ꢳꢄꢲꢨꢋꢅꢛꢄꢴꢐꢉꢧꢄꢱꢄꢗꢄꢘꢑꢒꢄꢇꢗꢔꢒꢄꢍꢒꢄꢍꢔꢄꢍꢵꢵꢄꢇꢈꢆꢄꢣꢗꢔꢕꢇ  
ꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢕꢙꢡꢒꢑꢞꢄꢍꢒꢄꢲꢠꢦꢄꢌꢍꢎꢆꢃ  
ꢳꢄꢬꢋꢄꢴꢐꢉꢧꢄꢱꢄꢦꢈꢆꢒꢄꢬꢋꢄꢰꢧꢉꢄꢙꢕꢄꢇꢗꢔꢒꢆꢎꢄꢍꢒꢄꢙꢒꢄꢲꢠꢦꢪꢄꢇꢈꢆ  
ꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢍꢣꢝꢆꢘꢇꢕꢄꢘꢑꢒꢄꢣꢆꢄꢘꢞꢆꢑꢔꢞꢜꢄꢙꢎꢆꢒꢇꢙꢵꢙꢆꢎꢄꢎꢗꢆꢄꢇꢍꢄ  
ꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢇꢈꢆꢄꢵꢗꢒꢘꢇꢙꢍꢒꢄꢇꢈꢑꢇꢄꢎꢆꢘꢔꢆꢑꢕꢆꢕꢄꢕꢘꢔꢆꢆꢒꢄꢕꢑꢇꢗꢔꢑꢇꢙꢍꢒ  
ꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢍꢵꢄꢍꢣꢝꢆꢘꢇꢕꢄꢚꢙꢇꢈꢙꢒꢄꢑꢄꢕꢈꢍꢔꢇꢄꢎꢙꢕꢇꢑꢒꢘꢆꢃ  
ꢳꢄꢛꢐꢩꢠꢲꢐꢛꢛꢐꢴꢠꢰꢧꢖꢛꢠꢋꢬꢭꢮꢛꢄꢱꢄꢫꢎꢝꢗꢕꢇꢄꢇꢈꢆꢄꢔꢑꢒꢡꢆꢄꢑꢘꢘꢍꢔꢎꢙꢒꢡꢄꢇꢍ  
ꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢇꢈꢆꢄꢞꢍꢘꢑꢇꢙꢍꢒꢄꢍꢵꢄꢍꢣꢝꢆꢘꢇꢕꢃ  
ꢳꢄꢬꢋꢄꢰꢧꢶꢧꢰꢄꢱꢄꢅꢆꢞꢆꢘꢇꢄꢰꢐꢦꢄꢚꢈꢆꢒꢄꢍꢣꢝꢆꢘꢇꢕꢄꢑꢓꢓꢆꢑꢔꢕꢄꢚꢙꢇꢈꢙꢒꢄꢑ  
ꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢕꢈꢍꢔꢇꢄꢎꢙꢕꢇꢑꢒꢘꢆꢄꢍꢔꢄꢕꢆꢞꢆꢘꢇꢄꢮꢬꢭꢮꢄꢚꢈꢆꢒꢄꢍꢣꢝꢆꢘꢇꢕ  
ꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢑꢓꢓꢆꢑꢔꢕꢄꢚꢙꢇꢈꢙꢒꢄꢑꢄꢞꢍꢒꢡꢄꢎꢙꢕꢇꢑꢒꢘꢆꢄꢍꢒꢄꢇꢈꢆꢄꢕꢘꢔꢆꢆꢒꢃ  
B/W MODE SETUP  
1.BURST MODE  
ON  
2.IR MODE  
3.IR LEVEL  
4.RETURN  
ON  
HIGH  
ꢀꢁ  
 
◆ꢂꢃꢄꢅꢆꢂꢇꢂꢅꢈꢉꢂꢊꢋꢌꢉꢂꢍꢎꢂꢎꢏꢍꢐꢑꢈꢉꢌꢂꢐꢋꢂꢒꢓꢋꢔꢋꢕꢒꢂꢍꢖꢂꢗꢂꢖꢋꢕꢊꢗꢔꢂꢉꢖꢘꢍꢕꢋꢖꢊꢉꢖꢐꢙꢂꢚꢛꢐꢂꢎꢏꢍꢐꢑꢈꢉꢎꢂꢐꢋꢂ  
ꢒꢜꢝꢞꢒꢂꢊꢋꢌꢉꢂꢏꢈꢉꢖꢂꢗꢊꢚꢍꢉꢖꢐꢂꢍꢔꢔꢛꢊꢍꢖꢗꢐꢍꢋꢖꢂꢍꢎꢂꢔꢋꢏꢟꢂꢂꢎꢉꢐꢂꢛꢠꢂꢐꢈꢉꢂꢎꢏꢍꢐꢑꢈꢍꢖꢡꢂꢐꢍꢊꢉꢂꢢꢋꢕꢂꢃꢄꢅꢆꢂ  
ꢊꢋꢌꢉꢙꢂꢠꢕꢉꢎꢎꢂꢐꢈꢉꢂꢣꢛꢖꢑꢐꢍꢋꢖꢂꢤꢉꢐꢛꢠꢂꢎꢏꢍꢐꢑꢈꢟꢂꢛꢂꢑꢗꢖꢂꢐꢛꢕꢖꢂꢋꢖꢂꢋꢕꢂꢋꢢꢢꢂꢐꢈꢉꢂꢚꢛꢕꢎꢐꢂꢎꢍꢡꢖꢗꢔꢂꢋꢖꢂꢜꢝꢞꢂ  
ꢊꢋꢌꢉꢟ  
AUTO SETUP  
ꢦꢂꢜꢄꢧꢤꢅꢂꢨꢆꢩꢪꢂꢇꢂꢛꢂꢑꢗꢖꢂꢐꢛꢕꢖꢂꢋꢖꢂꢋꢕꢂꢋꢢꢢꢂꢐꢈꢉꢂꢚꢛꢕꢎꢐꢂꢎꢍꢡꢖꢗꢔ  
1.BURST MODE  
2.COLOR→B/W  
DURATION  
DWELL TIME  
3.B/W→COLOR  
DURATION  
ON  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢋꢖꢂꢜꢝꢞꢂꢊꢋꢌꢉꢟ  
FAST  
3SEC  
ꢦꢂꢩꢄꢧꢫꢆꢬꢂꢇꢂꢛꢂꢑꢗꢖꢂꢎꢉꢔꢉꢑꢐꢂꢚꢕꢍꢡꢈꢐꢖꢉꢎꢎꢂꢋꢢꢂꢍꢔꢔꢛꢊꢍꢖꢗꢐꢍꢋꢖ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢗꢚꢋꢛꢐꢂꢑꢈꢗꢖꢡꢍꢖꢡꢂꢐꢈꢉꢂꢌꢗꢭꢝꢖꢍꢡꢈꢐꢂꢊꢋꢌꢉꢟ  
ꢦꢂꢩꢞꢪꢮꢫꢨꢪꢂꢇꢂꢛꢂꢑꢗꢖꢂꢎꢉꢔꢉꢑꢐꢂꢐꢈꢉꢂꢌꢛꢕꢗꢐꢍꢋꢖꢂꢐꢍꢊꢉꢂꢗꢚꢋꢛꢐ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢑꢈꢗꢖꢡꢍꢖꢡꢂꢐꢈꢉꢂꢌꢗꢭꢝꢖꢍꢡꢈꢐꢂꢊꢋꢌꢉꢟ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ→ꢯꢎꢙꢂꢰꢎꢙꢂꢱꢎꢙꢂꢁꢲꢎꢙꢂꢁꢰꢎꢙꢂꢀꢲꢎꢙꢂꢯꢲꢎꢙꢂꢳꢲꢙꢂꢴꢲꢎ  
FAST  
10SEC  
DWELL TIME  
4.RETURN  
ꢓꢆꢮꢆꢧ→ꢜꢝꢞ ꢜꢝꢞ→ꢓꢆꢮꢆꢧ  
ꢣꢃꢤꢅ  
ꢤꢮꢆꢞ  
ꢀꢟꢰꢂꢔꢛꢷ  
ꢁꢂꢔꢛꢷ  
ꢰꢂꢔꢛꢷ  
ꢁꢲꢂꢔꢛꢷ  
ꢵꢂꢅꢈꢉꢂꢌꢗꢭꢝꢖꢍꢡꢈꢐꢂꢎꢏꢍꢐꢑꢈꢍꢖꢡꢂꢠꢋꢍꢖꢐꢂꢋꢢꢂꢐꢈꢉ  
ꢂꢂꢑꢗꢊꢉꢕꢗꢂꢑꢗꢖꢂꢚꢉꢂꢗꢌꢶꢛꢎꢐꢉꢌꢟ  
NOTE  
When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as like selecting 'COLOR'  
mode and 'AUTO' mode can not be selected.  
ꢤꢠꢉꢑꢍꢗꢔꢂꢤꢉꢐꢐꢍꢖꢡ  
ꢁꢟꢂꢞꢈꢉꢖꢂꢐꢈꢉꢂꢤꢪꢅꢄꢸꢂꢊꢉꢖꢛꢂꢎꢑꢕꢉꢉꢖꢂꢍꢎꢂꢌꢍꢎꢠꢔꢗꢭꢉꢌꢙꢂꢎꢉꢔꢉꢑꢐꢂꢒꢤꢸꢪꢓꢫꢃꢮꢒꢂꢚꢭꢂꢛꢎꢍꢖꢡꢂꢐꢈꢉꢂ  
ꢣꢛꢖꢑꢐꢍꢋꢖꢂꢤꢉꢐꢛꢠꢂꢎꢏꢍꢐꢑꢈꢂꢎꢋꢂꢐꢈꢗꢐꢂꢐꢈꢉꢂꢗꢕꢕꢋꢏꢂꢍꢖꢌꢍꢑꢗꢐꢉꢎꢂꢒꢤꢸꢪꢓꢫꢃꢮꢒꢟ  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.SSNR  
5.BACKLIGHT  
6.DNR3  
ATW  
OFF  
OFF  
ON  
7.DAY/NIGHT  
8.SPECIAL  
9.EXIT  
AUTO  
SAVE  
ꢀꢁ  
 
ꢀꢁꢂꢃꢄꢅꢄꢆꢇꢂꢈꢂꢉꢄꢊꢋꢌꢄꢉꢂꢍꢎꢉꢄꢂꢏꢊꢋꢐꢑꢂꢇꢒꢄꢂꢓꢏꢐꢆꢇꢋꢎꢐꢂꢃꢄꢇꢏꢔꢂꢊꢕꢋꢇꢆꢒꢁ  
SPECIAL  
1.IMAGE ADJ  
2.CAM TITLE  
3.SYNC  
OFF  
INT  
4.MOTION DET  
5.PRIVACY  
6.DIS  
OFF  
OFF  
OFF  
7.COMM ADJ  
8.LANGUAGE  
9.RETURN  
ENGLISH  
◆ꢂꢖꢗꢘꢙꢚꢂꢘꢛꢜꢁꢂꢝ  
ꢞꢟꢂꢠꢒꢄꢐꢂꢇꢒꢄꢂꢃꢚꢡꢢꢣꢂꢍꢄꢐꢏꢂꢊꢆꢌꢄꢄꢐꢂꢋꢊꢂꢉꢋꢊꢔꢅꢈꢤꢄꢉꢥꢂꢊꢄꢅꢄꢆꢇꢂꢦꢖꢗꢘꢙꢚꢂꢘꢛꢜꢦꢂꢧꢤꢂ  
ꢏꢊꢋꢐꢑꢂꢇꢒꢄꢂꢓꢏꢐꢆꢇꢋꢎꢐꢂꢃꢄꢇꢏꢔꢂꢊꢕꢋꢇꢆꢒꢂꢊꢎꢂꢇꢒꢈꢇꢂꢇꢒꢄꢂꢈꢌꢌꢎꢕꢂꢋꢐꢉꢋꢆꢈꢇꢄꢊꢂꢦꢖꢗꢘꢙꢚꢂꢘꢛꢜꢦꢁ  
ꢀꢟꢂꢃꢄꢅꢄꢆꢇꢂꢈꢂꢉꢄꢊꢋꢌꢄꢉꢂꢍꢎꢉꢄꢂꢏꢊꢋꢐꢑꢂꢇꢒꢄꢂꢓꢏꢐꢆꢇꢋꢎꢐꢂꢃꢄꢇꢏꢔꢂꢊꢕꢋꢇꢆꢒꢁ  
IMAGE SETUP  
1.V-REV  
2.H-REV  
3.D-ZOOM  
OFF  
OFF  
4.FONT COLOR  
5.SHARPNESS  
6.MONITOR  
7.RETURN  
WHITE  
ON  
LCD  
ꢨꢂꢩꢪꢫꢚꢩꢂꢝꢂꢏꢂꢆꢈꢐꢂꢭꢅꢋꢔꢂꢇꢒꢄꢂꢔꢋꢆꢇꢏꢌꢄꢂꢮꢄꢌꢇꢋꢆꢈꢅꢅꢤꢂꢎꢐꢂꢇꢒꢄꢂꢊꢆꢌꢄꢄꢐꢁ  
ꢨꢂꢯꢪꢫꢚꢩꢂꢝꢂꢏꢂꢆꢈꢐꢂꢭꢅꢋꢔꢂꢇꢒꢄꢂꢔꢋꢆꢇꢏꢌꢄꢂꢒꢎꢌꢋꢰꢎꢐꢇꢈꢅꢅꢤꢂꢎꢐꢂꢇꢒꢄꢂꢊꢆꢌꢄꢄꢐꢁ  
ꢨꢂꢛꢪꢱꢲꢲꢗꢂꢝꢂꢏꢂꢆꢈꢐꢂꢏꢊꢄꢂꢈꢂꢉꢋꢑꢋꢇꢈꢅꢂꢰꢎꢎꢍꢂꢎꢭꢂꢳꢞꢂꢴꢂꢳꢞꢵꢁ  
ꢨꢂꢓꢲꢶꢡꢂꢷꢲꢸꢲꢫꢂꢝꢂꢏꢂꢆꢈꢐꢂꢆꢒꢈꢐꢑꢄꢂꢇꢒꢄꢂꢲꢃꢛꢂꢭꢎꢐꢇꢂꢆꢎꢅꢎꢌꢁꢂꢹꢠꢒꢋꢇꢄꢥꢂꢅꢅꢎꢕꢥꢂꢙꢌꢄꢄꢐꢥꢂꢫꢄꢉꢥꢂꢺꢅꢏꢄꢟ  
ꢨꢂꢃꢯꢘꢫꢣꢶꢚꢃꢃꢂꢝꢂꢘꢊꢂꢤꢎꢏꢂꢋꢐꢆꢌꢄꢈꢊꢄꢂꢇꢒꢋꢊꢂꢮꢈꢅꢏꢄꢥꢂꢇꢒꢄꢂꢔꢋꢆꢇꢏꢌꢄꢂꢎꢏꢇꢅꢋꢐꢄꢂꢧꢄꢆꢎꢍꢄꢊꢂꢊꢇꢌꢎꢐꢑꢄꢌꢂꢈꢐꢉꢂꢆꢅꢄꢈꢌꢄꢌꢁꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢘꢉꢻꢏꢊꢇꢂꢇꢒꢋꢊꢂꢮꢈꢅꢏꢄꢂꢈꢔꢔꢌꢎꢔꢌꢋꢈꢇꢄꢅꢤꢂꢉꢄꢔꢄꢐꢉꢋꢐꢑꢂꢎꢐꢂꢇꢒꢄꢂꢊꢒꢈꢌꢔꢐꢄꢊꢊꢂꢎꢭꢂꢇꢒꢄꢂꢔꢋꢆꢇꢏꢌꢄꢁ  
ꢨꢂꢗꢲꢶꢖꢡꢲꢫꢂꢝꢂꢣꢅꢄꢈꢊꢄꢂꢆꢒꢈꢐꢑꢄꢂꢇꢒꢄꢂꢊꢄꢇꢇꢋꢐꢑꢊꢂꢮꢈꢅꢏꢄꢂꢎꢭꢂꢮꢋꢉꢄꢎꢂꢈꢔꢔꢌꢎꢔꢌꢋꢈꢇꢄꢂꢇꢎꢂꢤꢎꢏꢌꢂꢍꢎꢐꢋꢇꢎꢌꢁ  
ꢪꢂꢸꢷꢛꢂꢝꢂꢣꢅꢄꢈꢊꢄꢂꢊꢄꢅꢄꢆꢇꢂꢇꢒꢋꢊꢂꢍꢄꢐꢏꢂꢋꢇꢄꢍꢂꢕꢒꢄꢐꢂꢏꢊꢋꢐꢑꢂꢈꢂꢸꢷꢛꢂꢍꢎꢐꢋꢇꢎꢌꢁ  
ꢪꢂꢷꢫꢡꢂꢝꢂꢣꢅꢄꢈꢊꢄꢂꢊꢄꢅꢄꢆꢇꢂꢇꢒꢋꢊꢂꢍꢄꢐꢏꢂꢋꢇꢄꢍꢂꢕꢒꢄꢐꢂꢏꢊꢋꢐꢑꢂꢈꢂꢷꢫꢡꢂꢍꢎꢐꢋꢇꢎꢌꢁ  
ꢪꢂꢢꢃꢚꢫꢂꢝꢂꢣꢅꢄꢈꢊꢄꢂꢏꢊꢄꢂꢇꢒꢋꢊꢂꢍꢄꢐꢏꢂꢋꢇꢄꢍꢂꢕꢒꢄꢐꢂꢏꢊꢋꢐꢑꢂꢈꢂꢍꢎꢐꢋꢇꢎꢌꢂꢎꢇꢒꢄꢌꢂꢇꢒꢈꢐꢂꢊꢇꢈꢐꢉꢈꢌꢉꢂꢎꢐꢄꢊꢁꢂꢏꢂꢆꢈꢐꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢆꢒꢈꢐꢑꢄꢂꢇꢒꢄꢂꢑꢈꢍꢍꢈꢥꢂꢣꢚꢛꢂꢅꢄꢮꢄꢅꢥꢂꢈꢐꢉꢂꢆꢎꢅꢎꢌꢂꢑꢈꢋꢐꢂꢋꢐꢂꢇꢒꢄꢂꢊꢏꢧꢂꢍꢄꢐꢏꢊꢁ  
ꢨꢂꢫꢚꢡꢢꢫꢶꢂꢝꢂꢃꢄꢅꢄꢆꢇꢂꢇꢒꢋꢊꢂꢇꢎꢂꢊꢈꢮꢄꢂꢇꢒꢄꢂꢊꢄꢇꢇꢋꢐꢑꢊꢂꢭꢎꢌꢂꢇꢒꢄꢂꢖꢗꢘꢙꢚꢂꢘꢛꢜꢂꢍꢄꢐꢏꢂꢈꢐꢉꢂꢇꢎꢂꢌꢄꢇꢏꢌꢐꢂꢇꢎꢂꢇꢒꢄꢂꢃꢚꢡꢢꢣꢂꢍꢄꢐꢏꢁ  
ꢀꢀ  
 
NOTE  
If you increase the SHARPNESS level too high, the picture may become distorted or noise  
may appear.  
◆ꢂꢃꢄꢅꢂꢆꢇꢆꢈꢉꢂꢊꢂꢇꢋꢂꢌꢍꢎꢂꢏꢐꢑꢏꢒꢂꢓꢂꢑꢔꢑꢕꢏꢖꢂꢑꢗꢏꢂꢑꢔꢑꢕꢏꢂꢘꢔꢕꢕꢂꢓꢙꢙꢏꢓꢒꢂꢍꢐꢂꢑꢗꢏꢂꢚꢍꢐꢔꢑꢍꢒꢛ  
ꢜꢝꢂꢇꢋꢂꢑꢗꢏꢂꢞꢟꢉꢃꢇꢄꢈꢂꢚꢏꢐꢎꢂꢠꢡꢒꢏꢏꢐꢂꢔꢠꢂꢢꢔꢠꢙꢕꢓꢌꢏꢢꢖꢂꢎꢠꢏꢂꢑꢗꢏꢂꢣꢎꢐꢡꢑꢔꢍꢐꢂꢞꢏꢑꢎꢙꢂꢠꢘꢔꢑꢡꢗꢂꢠꢍꢂꢑꢗꢓꢑꢂꢑꢗꢏꢂ  
ꢓꢒꢒꢍꢘꢂꢔꢐꢢꢔꢡꢓꢑꢏꢠꢂꢤꢃꢄꢅꢂꢆꢇꢆꢈꢉꢤꢛ  
CAMERA TITLE SETUP  
ꢀꢝꢂꢞꢏꢑꢂꢔꢑꢂꢑꢍꢂꢤꢥꢦꢤꢂꢧꢌꢂꢎꢠꢔꢐꢨꢂꢑꢗꢏꢂꢣꢎꢐꢡꢑꢔꢍꢐꢂꢞꢏꢑꢎꢙꢂꢠꢘꢔꢑꢡꢗꢛ  
A B C D E F G H I J K L M  
ꢁꢝꢂꢟꢒꢏꢠꢠꢂꢑꢗꢏꢂꢣꢎꢐꢡꢑꢔꢍꢐꢂꢞꢏꢑꢎꢙꢂꢠꢘꢔꢑꢡꢗꢛ  
N O P Q R S T U V W X Y Z  
a b c d e f g h i j k l m  
n o p q r s t u v w x y z  
- . 0 1 2 3 4 5 6 7 8 9  
ꢩꢝꢂꢪꢠꢏꢂꢑꢗꢏꢂꢣꢎꢐꢡꢑꢔꢍꢐꢂꢞꢏꢑꢎꢙꢂꢠꢘꢔꢑꢡꢗꢂꢑꢍꢂꢚꢍꢫꢏꢂꢑꢍꢂꢓ  
ꢢꢏꢠꢔꢒꢏꢢꢂꢕꢏꢑꢑꢏꢒꢂꢓꢐꢢꢂꢠꢏꢕꢏꢡꢑꢂꢑꢗꢏꢂꢕꢏꢑꢑꢏꢒꢂꢧꢌꢂꢙꢒꢏꢠꢠꢔꢐꢨ  
ꢑꢗꢏꢂꢣꢎꢐꢡꢑꢔꢍꢐꢂꢞꢏꢑꢎꢙꢂꢠꢘꢔꢑꢡꢗꢛꢂꢬꢏꢙꢏꢓꢑꢂꢑꢗꢔꢠꢂꢑꢍꢂꢏꢐꢑꢏꢒ  
ꢚꢎꢕꢑꢔꢙꢕꢏꢂꢕꢏꢑꢑꢏꢒꢠꢛꢂꢎꢂꢡꢓꢐꢂꢏꢐꢑꢏꢒꢂꢎꢙꢂꢑꢍꢂꢜꢮꢂꢕꢏꢑꢑꢏꢒꢠꢛ  
ꢮꢝꢂꢉꢐꢑꢏꢒꢂꢓꢂꢑꢔꢑꢕꢏꢖꢂꢚꢍꢫꢏꢂꢑꢗꢏꢂꢡꢎꢒꢠꢍꢒꢂꢑꢍꢂꢤꢟꢥꢞꢤꢂꢓꢐꢢ  
ꢙꢒꢏꢠꢠꢂꢑꢗꢏꢂꢣꢎꢐꢡꢑꢔꢍꢐꢂꢞꢏꢑꢎꢙꢂꢠꢘꢔꢑꢡꢗꢛꢂꢆꢗꢏꢂꢏꢐꢑꢏꢒꢏꢢ  
ꢑꢔꢑꢕꢏꢂꢓꢙꢙꢏꢓꢒꢠꢂꢍꢐꢂꢑꢗꢏꢂꢠꢡꢒꢏꢏꢐꢛꢂꢞꢏꢕꢏꢡꢑꢂꢑꢗꢏꢂꢙꢍꢠꢔꢑꢔꢍꢐ  
ꢑꢍꢂꢢꢔꢠꢙꢕꢓꢌꢂꢑꢗꢏꢂꢑꢔꢑꢕꢏꢂꢍꢐꢂꢑꢗꢏꢂꢠꢡꢒꢏꢏꢐꢂꢧꢌꢂꢎꢠꢔꢐꢨꢂꢑꢗꢏ  
ꢣꢎꢐꢡꢑꢔꢍꢐꢂꢞꢏꢑꢎꢙꢂꢠꢘꢔꢑꢡꢗꢂꢓꢐꢢꢂꢙꢒꢏꢠꢠꢂꢑꢗꢏꢂꢣꢎꢐꢡꢑꢔꢍꢐ  
ꢞꢏꢑꢎꢙꢂꢠꢘꢔꢑꢡꢗꢛꢂꢯꢗꢏꢐꢂꢑꢗꢏꢂꢙꢍꢠꢔꢑꢔꢍꢐꢂꢔꢠꢂꢢꢏꢑꢏꢒꢚꢔꢐꢏꢢꢖ  
ꢠꢏꢕꢏꢡꢑꢂꢤꢉꢦꢰꢤꢂꢓꢐꢢꢂꢙꢒꢏꢠꢠꢂꢑꢗꢏꢂꢣꢎꢐꢡꢑꢔꢍꢐꢂꢞꢏꢑꢎꢙꢂꢠꢘꢔꢑꢡꢗ  
ꢑꢍꢂꢒꢏꢑꢎꢒꢐꢂꢑꢍꢂꢑꢗꢏꢂꢞꢟꢉꢃꢇꢄꢈꢂꢚꢏꢐꢎꢛ  
←→CLR  
POS  
END  
SHOP  
NOTE  
When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if  
you enter one.  
Only English is available in this mode.  
If you move the cursor to CLR and press the Function Setup switch, all the letters are  
deleted. To edit a letter, change the cursor to the bottom left arrow and press the Function  
Setup switch. Move the cursor over the letter to be edited, move the cursor to the letter to be  
inserted and then press the Function Setup switch.  
◆ꢂꢞꢭꢦꢃꢂꢊꢂꢇꢐꢂꢓꢒꢏꢓꢠꢂꢘꢗꢏꢒꢏꢂꢑꢗꢏꢂꢠꢎꢙꢙꢕꢌꢂꢔꢠꢂꢓꢑꢂꢱꢲꢳꢴꢵꢦꢆꢞꢃꢝꢖꢂꢮꢲꢳꢴꢵꢈꢝꢖꢂꢌꢍꢎꢂꢡꢓꢐꢂꢠꢌꢐꢡꢗꢒꢍꢐꢔꢴꢏꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢑꢗꢏꢂꢍꢎꢑꢙꢎꢑꢂꢙꢗꢓꢠꢏꢂꢍꢋꢂꢚꢎꢕꢑꢔꢙꢕꢏꢂꢡꢓꢚꢏꢒꢓꢠꢂꢎꢠꢔꢐꢨꢂꢑꢗꢏꢂꢙꢍꢘꢏꢒꢂꢠꢌꢐꢡꢗꢒꢍꢐꢔꢴꢓꢑꢔꢍꢐꢂꢋꢎꢐꢡꢑꢔꢍꢐꢂꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢵꢈꢔꢐꢏꢶꢈꢍꢡꢷꢝꢂꢘꢔꢑꢗꢍꢎꢑꢂꢎꢠꢔꢐꢨꢂꢓꢂꢠꢌꢐꢡꢗꢒꢍꢐꢔꢴꢓꢑꢔꢍꢐꢂꢠꢔꢨꢐꢓꢕꢂꢨꢏꢐꢏꢒꢓꢑꢍꢒꢛ  
ꢶꢂꢇꢦꢆꢂꢊꢂꢇꢐꢑꢏꢒꢐꢓꢕꢂꢞꢌꢐꢡꢗꢒꢍꢐꢔꢴꢓꢑꢔꢍꢐꢂꢙꢏ  
ꢶꢂꢈꢸꢈꢂꢊꢂꢟꢍꢘꢏꢒꢂꢞꢌꢐꢡꢗꢒꢍꢐꢔꢴꢓꢑꢔꢍꢐꢂꢙꢏꢖꢂꢈꢔꢐꢏꢶꢕꢍꢡꢷ  
ꢹꢂꢟꢒꢏꢠꢠꢂꢑꢗꢏꢂꢣꢎꢐꢡꢑꢔꢍꢐꢂꢞꢏꢑꢎꢙꢂꢠꢘꢔꢑꢡꢗꢛ  
ꢹꢂꢎꢂꢡꢓꢐꢂꢠꢏꢕꢏꢡꢑꢂꢓꢂꢢꢏꢠꢔꢒꢏꢢꢂꢙꢗꢓꢠꢏꢂꢋꢒꢍꢚꢂꢲꢂꢑꢍꢂꢁꢮꢺꢂꢘꢗꢏꢐꢂꢠꢏꢕꢏꢡꢑꢂꢤꢙꢗꢓꢠꢏꢤꢛ  
ꢀꢁ  
 
NOTE  
When using AC power at 60Hz(NTSC), 50Hz(PAL), frequency, you can use the L/L type  
synchronization.  
◆ꢂꢃꢄꢅꢆꢄꢇꢂꢈꢉꢅꢂꢊꢅꢋꢌꢍꢂꢎꢏꢐꢑꢒꢓꢔꢂꢋꢕꢍꢂꢕꢂꢖꢗꢕꢔꢒꢏꢗ  
ꢔꢋꢕꢔꢂꢕꢘꢘꢐꢙꢍꢂꢚꢐꢒꢂꢔꢐꢂꢐꢛꢍꢗꢏꢜꢗꢂꢝꢐꢜꢗꢝꢗꢞꢔꢂꢐꢖ  
ꢐꢛꢟꢗꢓꢔꢍꢂꢌꢞꢂꢠꢂꢑꢌꢖꢖꢗꢏꢗꢞꢔꢂꢕꢏꢗꢕꢍꢂꢐꢞꢂꢔꢋꢗꢂꢍꢓꢏꢗꢗꢞꢡ  
ꢕꢞꢑꢂꢔꢋꢗꢂꢙꢐꢏꢑꢍꢂꢢꢃꢄꢅꢆꢄꢇꢂꢈꢉꢅꢉꢣꢅꢉꢈꢢꢂꢕꢎꢎꢗꢕꢏ  
ꢐꢞꢂꢔꢋꢗꢂꢍꢓꢏꢗꢗꢞꢂꢙꢋꢗꢞꢂꢝꢐꢜꢗꢝꢗꢞꢔꢂꢌꢍꢂꢑꢗꢔꢗꢓꢔꢗꢑꢤ  
ꢥꢓꢔꢌꢜꢌꢔꢚꢂꢓꢕꢞꢂꢛꢗꢂꢝꢐꢞꢌꢔꢐꢏꢂꢝꢐꢏꢗꢂꢗꢖꢖꢌꢓꢌꢗꢞꢔꢘꢚꢤ  
ꢦꢧꢂꢨꢋꢗꢞꢂꢔꢋꢗꢂꢩꢪꢉꢣꢆꢥꢫꢂꢝꢗꢞꢒꢂꢍꢓꢏꢗꢗꢞꢂꢌꢍꢂꢑꢌꢍꢎꢘꢕꢚꢗꢑꢡ  
ꢎꢏꢗꢍꢍꢂꢔꢋꢗꢂꢬꢒꢞꢓꢔꢌꢐꢞꢂꢩꢗꢔꢒꢎꢂꢍꢙꢌꢔꢓꢋꢂꢍꢐꢂꢔꢋꢕꢔꢂꢔꢋꢗꢂꢕꢏꢏꢐꢙ  
ꢌꢞꢑꢌꢓꢕꢔꢗꢍ‘ꢃꢄꢅꢆꢄꢇꢂꢈꢉꢅ’ꢤ  
MOTION DET  
1.SENSITIVITY  
2.AREA MODE  
3.SEL POS  
4.XPOS  
5.YPOS  
6.FILL → SET  
7.RETRUN  
AREA1  
ON  
L-TOP  
3
5
ꢀꢧꢂꢩꢗꢔꢂꢒꢎꢂꢔꢋꢗꢂꢝꢐꢑꢗꢂꢒꢍꢌꢞꢭꢂꢔꢋꢗꢂꢬꢒꢞꢓꢔꢌꢐꢞꢂꢩꢗꢔꢒꢎꢂꢍꢙꢌꢔꢓꢋꢤ  
ꢮꢂꢩꢉꢇꢩꢆꢅꢆꢯꢆꢅꢰꢂꢊꢂꢒꢂꢓꢕꢞꢂꢍꢗꢘꢗꢓꢔꢂꢒꢎꢂꢔꢐꢂꢠꢂꢃꢈꢂꢕꢏꢗꢕꢍꢤꢂꢨꢋꢗꢞꢂꢩꢉꢇꢩꢆꢅꢆꢯꢆꢅꢰꢂꢞꢒꢝꢛꢗꢏꢂꢌꢍꢂꢋꢌꢭꢋꢡꢂꢝꢐꢔꢌꢐꢞꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢑꢗꢔꢗꢓꢔꢌꢐꢞꢂꢍꢗꢞꢍꢌꢔꢌꢜꢌꢔꢚꢂꢌꢍꢂꢌꢞꢓꢏꢗꢕꢍꢗꢑꢂꢔꢐꢂꢏꢗꢓꢐꢭꢞꢌꢱꢗꢂꢗꢜꢗꢞꢂꢍꢝꢕꢘꢘꢂꢝꢐꢜꢗꢝꢗꢞꢔꢤ  
ꢮꢂꢥꢲꢉꢥꢂꢃꢄꢈꢉꢂꢊꢂꢈꢗꢔꢗꢏꢝꢌꢞꢗꢍꢂꢙꢋꢗꢔꢋꢗꢏꢂꢔꢐꢂꢒꢍꢗꢂꢔꢋꢗꢂꢃꢈꢂꢕꢏꢗꢕꢂꢍꢗꢘꢗꢓꢔꢗꢑꢂꢌꢞꢂꢩꢉꢇꢩꢆꢅꢆꢯꢆꢅꢰꢤ  
ꢮꢂꢩꢉꢫꢂꢪꢄꢩꢂꢊꢂꢈꢗꢔꢗꢏꢝꢌꢞꢗꢍꢂꢙꢋꢌꢓꢋꢂꢐꢖꢂꢔꢋꢗꢂꢁꢂꢜꢗꢏꢔꢌꢓꢗꢍꢂꢐꢖꢂꢗꢕꢓꢋꢂꢃꢈꢂꢕꢏꢗꢕꢂꢌꢍꢂꢔꢐꢂꢛꢗꢂꢒꢍꢗꢑꢤ  
ꢮꢂꢳꢪꢄꢩꢂꢊꢂꢈꢗꢔꢗꢏꢝꢌꢞꢗꢍꢂꢔꢋꢗꢂꢓꢐꢐꢏꢑꢌꢞꢕꢔꢗꢂꢐꢖꢂꢔꢋꢗꢂꢋꢐꢏꢌꢱꢐꢞꢔꢕꢘꢂꢕꢴꢌꢍꢂꢖꢐꢏꢂꢩꢉꢫꢂꢪꢄꢩꢤ  
ꢮꢂꢰꢪꢄꢩꢂꢊꢂꢈꢗꢔꢗꢏꢝꢌꢞꢗꢍꢂꢔꢋꢗꢂꢓꢐꢐꢏꢑꢌꢞꢕꢔꢗꢂꢐꢖꢂꢔꢋꢗꢂꢜꢗꢏꢔꢌꢓꢕꢘꢂꢕꢴꢌꢍꢂꢖꢐꢏꢂꢩꢉꢫꢂꢪꢄꢩꢤ  
ꢮꢂꢬꢆꢫꢫ→ꢩꢉꢅꢂꢊꢂꢬꢌꢘꢘꢍꢂꢌꢞꢂꢕꢂꢍꢗꢘꢗꢓꢔꢗꢑꢂꢃꢈꢂꢕꢏꢗꢕꢤꢂꢅꢋꢗꢂꢓꢐꢘꢐꢏꢂꢐꢖꢂꢔꢋꢗꢂꢕꢏꢗꢕꢂꢓꢕꢞꢂꢛꢗꢂꢍꢗꢘꢗꢓꢔꢗꢑꢂꢖꢏꢐꢝꢂꢛꢏꢐꢙꢞꢡꢂ  
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢐꢏꢕꢞꢭꢗꢡꢂꢛꢘꢒꢗꢡꢂꢓꢚꢕꢞꢡꢂꢭꢏꢗꢗꢞꢡꢂꢚꢗꢘꢘꢐꢙꢡꢂꢝꢕꢭꢗꢞꢔꢕꢂꢕꢞꢑꢂꢏꢗꢑꢤ  
ꢮꢂꢲꢉꢅꢵꢲꢇꢂꢊꢂꢩꢗꢘꢗꢓꢔꢂꢔꢋꢌꢍꢂꢔꢐꢂꢍꢕꢜꢗꢂꢔꢋꢗꢂꢃꢄꢅꢆꢄꢇꢂꢈꢉꢅꢂꢝꢗꢞꢒꢂꢍꢗꢔꢔꢌꢞꢭꢍꢂꢕꢞꢑꢂꢏꢗꢔꢒꢏꢞꢂꢔꢐꢂꢔꢋꢗꢂꢩꢪꢉꢣꢆꢥꢫꢂꢝꢗꢞꢒꢤ  
◆ꢂꢪꢲꢆꢥꢣꢰꢂꢊꢂꢃꢕꢍꢶꢂꢕꢞꢂꢕꢏꢗꢕꢂꢚꢐꢒꢂꢙꢕꢞꢔꢂꢔꢐꢂꢋꢌꢑꢗꢂꢐꢞꢂꢔꢋꢗꢂꢍꢓꢏꢗꢗꢞꢤ  
PRIVACY AREA SETUP  
1.AREA  
2.MODE  
3.MASK COLOR  
4.MASK TONE  
5.TOP  
AREA1  
OFF  
GREEN  
1
39  
6.BOTTOM  
7.LEFT  
79  
13  
8.RIGHT  
52  
9.RETURN  
ꢀꢁ  
 
ꢂꢃꢄꢅꢆꢇꢈꢄꢉꢆꢇꢄꢊꢋꢌꢍꢎꢏꢐꢄꢑꢇꢈꢒꢄꢓꢔꢕꢇꢇꢈꢄꢖꢓꢄꢗꢖꢓꢘꢙꢚꢛꢇꢗꢜꢄꢘꢕꢇꢓꢓꢄꢉꢆꢇꢄꢝꢒꢈꢔꢉꢖꢞꢈꢄ  
ꢊꢇꢉꢒꢘꢄꢓꢟꢖꢉꢔꢆꢄꢓꢞꢄꢉꢆꢚꢉꢄꢉꢆꢇꢄꢚꢕꢕꢞꢟꢄꢖꢈꢗꢖꢔꢚꢉꢇꢓꢄꢠꢋꢡꢎꢏꢍꢣꢠꢤ  
ꢀꢃꢄꢊꢇꢉꢄꢒꢘꢄꢉꢆꢇꢄꢑꢞꢗꢇꢄꢒꢓꢖꢈꢥꢄꢉꢆꢇꢄꢝꢒꢈꢔꢉꢖꢞꢈꢄꢊꢇꢉꢒꢘꢄꢓꢟꢖꢉꢔꢆꢤ  
ꢦꢄꢏꢡꢌꢏꢄꢧꢄꢒꢄꢔꢚꢈꢄꢓꢇꢙꢇꢔꢉꢄꢒꢘꢄꢉꢞꢄꢂꢀꢄꢋꢡꢎꢏꢍꢣꢄꢚꢕꢇꢚꢓꢤ  
ꢦꢄꢨꢩꢪꢌꢄꢧꢄꢪꢇꢉꢇꢕꢑꢖꢈꢇꢓꢄꢟꢆꢇꢉꢆꢇꢕꢄꢉꢞꢄꢒꢓꢇꢄꢉꢆꢇꢄꢚꢕꢇꢚꢄꢓꢇꢙꢇꢔꢉꢇꢗꢄꢖꢈꢄꢉꢆꢇꢄꢏꢡꢌꢏꢤ  
ꢦꢄꢨꢏꢊꢫꢄꢍꢩꢐꢩꢡꢄꢧꢄꢪꢇꢉꢇꢕꢑꢖꢈꢇꢄꢚꢕꢇꢚꢄꢔꢞꢙꢞꢕꢤꢄꢒꢄꢔꢚꢈꢄꢓꢇꢙꢇꢔꢉꢄꢬꢕꢇꢇꢈꢜꢄꢡꢇꢗꢜꢄꢭꢙꢒꢇꢜꢄꢭꢙꢚꢔꢮꢜꢄꢅꢆꢖꢉꢇꢜꢄꢬꢕꢚꢛꢤ  
ꢦꢄꢨꢏꢊꢫꢄꢯꢩꢰꢌꢄꢧꢄꢏꢗꢱꢒꢓꢉꢄꢉꢆꢇꢄꢲꢕꢖꢥꢆꢉꢈꢇꢓꢓꢄꢞꢳꢄꢨꢏꢊꢫꢄꢍꢩꢐꢩꢡꢤ  
ꢦꢄꢯꢩꢋꢴꢭꢩꢯꢯꢩꢨꢴꢐꢌꢝꢯꢴꢡꢎꢬꢵꢯꢄꢧꢏꢗꢱꢒꢓꢉꢄꢉꢆꢇꢄꢓꢖꢶꢇꢄꢚꢈꢗꢄꢘꢞꢓꢖꢉꢖꢞꢈꢄꢞꢳꢄꢉꢆꢇꢄꢓꢇꢙꢇꢔꢉꢇꢗꢄꢚꢕꢇꢚꢤ  
ꢦꢄꢡꢌꢯꢷꢡꢰꢄꢧꢄꢊꢇꢙꢇꢔꢉꢄꢉꢆꢖꢓꢄꢉꢞꢄꢓꢚꢸꢇꢄꢉꢆꢇꢄꢋꢡꢎꢏꢍꢣꢄꢑꢇꢈꢒꢄꢓꢇꢉꢉꢖꢈꢥꢓꢄꢚꢈꢗꢄꢕꢇꢉꢒꢕꢈꢄꢉꢞꢄꢉꢆꢇꢄꢊꢋꢌꢍꢎꢏꢐꢄꢑꢇꢈꢒꢤ  
◆ꢄꢪꢎꢊꢄꢹꢪꢖꢥꢖꢉꢚꢙꢄꢎꢑꢚꢥꢇꢄꢊꢉꢚꢲꢖꢙꢖꢶꢇꢕꢃꢄꢧ  
ꢯꢆꢖꢓꢄꢳꢒꢈꢔꢉꢖꢞꢈꢄꢑꢖꢉꢖꢥꢚꢉꢇꢓꢄꢚꢈꢛꢄꢘꢖꢔꢉꢒꢕꢇꢄꢑꢞꢸꢇꢑꢇꢈꢉꢄꢗꢒꢇꢄꢉꢞꢄꢇꢺꢉꢇꢕꢈꢚꢙꢄꢳꢚꢔꢉꢞꢕꢓꢄꢓꢒꢔꢆꢄꢚꢓꢄꢟꢖꢈꢗꢤ  
NOTE  
As the DIS function uses the digital zoom the camera's resolution will decrease.  
DIS doesn’t operate when background illumination is too low.  
DIS doesn’t operate when object pattern is monotonic as like sky or white wall.  
ꢋꢎꢡꢄꢊꢇꢈꢓꢞꢕ  
ꢭꢒꢖꢙꢉꢦꢎꢈꢄꢋꢎꢡꢄꢓꢇꢈꢓꢞꢕꢄꢉꢒꢕꢈꢓꢄꢉꢆꢇꢄꢟꢆꢖꢉꢇꢄꢐꢌꢪꢄꢩꢰꢄꢟꢆꢇꢈꢄꢉꢆꢇꢄꢋꢎꢡꢄꢖꢓꢄꢉꢕꢖꢥꢥꢇꢕꢇꢗꢄꢲꢛꢄꢑꢞꢉꢖꢞꢈꢤ  
OFF  
ON  
ꢓꢟꢖꢉꢔꢆꢄꢂꢄꢞꢈꢄ→ꢄꢂꢻꢓꢇꢔ  
ꢓꢟꢖꢉꢔꢆꢄꢀꢄꢞꢈꢄ→ꢄꢀꢻꢓꢇꢔ  
ꢓꢟꢖꢉꢔꢆꢄꢼꢄꢞꢈꢄ→ꢄꢼꢻꢓꢇꢔ  
ꢓꢟꢖꢉꢔꢆꢄꢽꢄꢰꢴꢍ  
ꢌꢺꢖꢉꢄꢊꢇꢉꢉꢖꢈꢥ  
ꢊꢇꢙꢇꢔꢉꢄꢚꢄꢗꢇꢓꢖꢕꢇꢗꢄꢌꢾꢎꢯꢄꢑꢞꢗꢇꢄꢒꢓꢖꢈꢥꢄꢉꢆꢇꢄꢝꢒꢈꢔꢉꢖꢞꢈꢄꢊꢇꢉꢒꢘꢄꢊꢟꢖꢉꢔꢆꢤ  
ꢦꢄꢊꢌꢄꢧꢄꢊꢚꢸꢇꢄꢉꢆꢇꢄꢔꢒꢕꢕꢇꢈꢉꢄꢓꢇꢉꢉꢖꢈꢥꢓꢄꢚꢈꢗꢄꢇꢺꢖꢉꢄꢉꢆꢇꢄꢨꢏꢎꢰꢄꢊꢌꢯꢷꢋꢄꢑꢇꢈꢒꢤ  
ꢦꢄꢰꢩꢯꢄꢊꢌꢄꢧꢄꢪꢞꢄꢈꢞꢉꢄꢓꢚꢸꢇꢄꢉꢆꢇꢄꢔꢒꢕꢕꢇꢈꢉꢄꢓꢇꢉꢉꢖꢈꢥꢓꢄꢚꢈꢗꢄꢇꢺꢖꢉꢄꢉꢆꢇꢄꢨꢏꢎꢰꢄꢊꢌꢯꢷꢋꢄꢑꢇꢈꢒꢤ  
ꢦꢄꢡꢌꢊꢌꢯꢄꢧꢄꢡꢇꢓꢇꢉꢓꢄꢉꢆꢇꢄꢔꢚꢑꢇꢕꢚꢄꢓꢇꢉꢉꢖꢈꢥꢓꢄꢉꢞꢄꢉꢆꢇꢄꢳꢚꢔꢉꢞꢕꢛꢄꢗꢇꢳꢚꢒꢙꢉꢓꢤꢄꢐꢚꢈꢥꢒꢚꢥꢇꢜꢄ  
ꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢄꢍꢞꢑꢑꢒꢈꢖꢔꢚꢉꢖꢞꢈꢄꢚꢈꢗꢄꢨꢞꢈꢖꢉꢞꢕꢄꢊꢇꢉꢉꢖꢈꢥꢓꢄꢚꢕꢇꢄꢈꢞꢉꢄꢖꢈꢖꢉꢖꢚꢙꢖꢶꢇꢗꢤ  
ꢀꢁ  
 
ꢅꢆꢇꢈꢉꢂꢊꢋꢅꢅꢌꢍꢎꢏ  
ꢐꢑꢒꢓꢔꢕꢖ  
ꢐꢒꢊꢊꢗꢓꢔꢕꢂꢘꢙꢚꢊꢕ  
Check the power cable, power supply output and video  
Northing appears on  
the screen.  
connection between the camera and monitor.  
Are the camera lens or the lens glass dirty?  
Clean the lens / glass with a soft clean cloth.  
Adjust the monitor controls, as required.  
If the camera is facing a very strong light, change  
the camera position.  
The image on the  
screen is dim.  
Adjust the lens focus.  
Adjust the contrast control of the monitor.  
The image on the  
If there is an intermediate device, correctly set the 75Ω/Hi-z.  
screen is dark.  
The camera is not  
working properly  
and the surface of  
the camera is hot.  
Check the camera is correctly connected to an appropriate  
regulated power source.  
Has MOTION DET been set to ON in the menu?  
Motion Detection  
is not activated.  
The color of the  
Check the settings in WHITE BALANCE menu.  
picture is not correct.  
The image on the  
Make sure that the camera isn’t facing direct sunlight or  
Check that the AGC setting in the EXPOSURE menu is’t set to OFF.  
The SENS-UP does  
not work.  
Check the EXPOSURE menu and make sure SHUTTER is set to------.  
ꢀꢁ  
 
 
▶ꢂꢃꢄꢃꢅ  
ꢀꢁ  
 
▶ꢂꢃꢄꢃꢅ  
ꢀꢁ  
 
▶ꢂꢃꢄꢃꢅ  
ꢀꢁ  
 
200 New Highway  
Amityville, NY 11701  
631-957-8700  
1 800 645 5516  
 

Sennheiser Microphone E908 User Manual
Servis Rhino Snow Blower 7600A User Manual
Silvercrest Food Processor KH 1161 User Manual
Sony Cassette Player WM FX561 User Manual
Sony DVD Recorder RDR HXD860 User Manual
Sony Flat Panel Television 4 115 568 121 User Manual
Sony Printer Accessories TA E1 User Manual
Speco Technologies Computer Monitor Color Video Monitor User Manual
Sunbeam Hot Beverage Maker KE8200 B User Manual
Sylvania CD Player SRCD302 User Manual