2466 Kruse Drive,
San Jose, CA 95131
408-433-3899 [email protected]
DVD DigiCopier
1,2,3! That is how easy it is to copy a DVD or a CD with the Addonics
! You can copy any DVD or CD without
DVD DigiCopier
a computer. All you need to do is place the master into the source drive located on the top of the unit and a blank media at the
destination drive at the bottom. Within few minutes your DVD or CD is copied, no button to push and no attention is needed.
It is more than a stand alone DVD Duplicator. It is also an External DVD-R/RW Burner! Want to create your own DVD title,
music CD, photo CD or data CD? It is a simple task for the Addonics DigiCopier as well. Just connect the DVD DigiCopier to
any Desktop or Notebook computer with the Addonics USIB interface cable and install the DVD/CD mastering software that
comes with the unit. Depending on the model you order, the DVD or CD DigiCopier can be connected to either a USB, Firewire
port or PCMCIA slot. After you create your own master, you can now make extra copies to distribute to your friends or
associates as easily as counting 1,2,3.
Just newly released! We also include a model that can copy DVD+R, DVD-R, DVD+RW and DVD-RW media. See detail
information below
Features
z Fast one to one
DVD Duplicator
z Auto duplication and easy operation with no push buttons
z Auto source DVD or CD and blank DVD or CD detection
z Automatic Format detection
z Auto detect DVD-R, DVD-RW, CD-R and CDRW media to perform at the maximum speed of the media
z Firmware upgradeable via the build in DVD Reader
z Small foot print
z Can be used as an
for PC or Notebook computers.
External DVD burner
z Connects to USB, Firewire port or PCMCIA port (by attaching different Addonics USIB interface cables.)
z Supports buffer underrun
Note: may not able to copy-protected DVD or CD.
Model and Pricing
Model
Description and Package Content
4X DVD+/-R/RW Duplicator/USB 2.0 Burner
4X DVD+/-R/RW and 16X CDRW Duplicator, external DVD-R/RW burner
with USB 2.0 USIB interface cable, Sonic MyDVD, DVD/CD mastering software and MPEGII
decoding software for Windows 98SE, Me, 2000 and XP, user guide
Package content:
AEDVDCOPPM4U
USB - Windows 98SE, Me, 2000, XP
Linux kernel 2.4 and higher, (use as CD-ROM only, DVD or CDRW function requires OS specific
CD mastering software)
Supported Operating
Systems
Firewire - Windows 98SE, Me, 2000, XP
Mac OS 9.0 (use as CD-ROM only, DVD or CDRW function requires OS specific CD mastering
software)
Supported Operating
Systems (for the bundled Windows 98SE, ME, 2000, NT and XP
Mastering software):
Power Consumption:
Power Source:
Weight:
80 watts Max
110/240 auto-sense AC/DC adapter
10.03 lb (4.55kg)
Size:
7.5 x 10.63 x 6.75 inch (W x D x H)
20% - 80%
Operating Humidity:
Operating Temperature:
Warranty:
5°C - 35°C
One Year
- Not all media are the same. At this time, we highly recommend to use Pioneer and Sony brand of DVD-R or DVD-RW
Media
media. Other brands of media that we tested and worked well with our drive were LEDA and GQ. We have received reports
that the media from Fuji and Maxell are not compatible.
e information provided in the tables above are for comparison purpose only
Note: The DVD DigiCopier may not be able to copy all the contents of copy protected DVD or CD
System Requirements
As a Stand Alone DVD Duplicator: no computer or software is needed
As an External DVD-R/RW burner:
z PC/AT or Compatible System
z PCMCIA Type I or Type II Slot, USB or FireWire port.
z Pentium II 350 MHz or Greater
z Minimum 64 MB RAM
z One of the Following Operating System:
{ For USB and Firewire - Windows 98SE/2000/Me/XP
{ For CardBus/PCMCIA - Windows 95/98SE, Me, 2000, XP
{ Hardware supports Mac OS 9.0 and higher, Linux kernel 2.4 and higher, Solaris 8 4/01 or later release (bundled software
supports Windows OS only)
Copyright © 1998 - 2003 Addonics Technologies, Inc. All Rights Reserved.
|